If you are someone that takes pride in your car or cars, and you install performance car parts, then you already know that you have to be able to take care of these parts. The most popular form of performance car parts is the tires and rims, which can be located and put on to any car ever made. If you go even a little bit of time such as a few weeks without cleaning these parts, it can make the look of your car go from hip to poor right away. Those wheels that have somewhat of a bright finish will look bad if there is an over abundance of brake dust that has accumulated itself on the rim.

If you are using a bleaching agent to clean these areas, you are actually doing more harm than you are good. When cleaning these areas you want to use a top quality washing soap, a wheel cleaner, a tire brush, and smaller brush, maybe even a toothbrush, to fully clean the smaller parts of your rims. When you are washing your car, you should always begin by cleaning your wheels and only do that once they have cooled off from your driving. You run the risk of staining your tires if you wash them when they are warm. You have bought these performance car parts, so you should also take care of them.

The type of cleaner that is recommended for cleaning the wheels are the types that you can spray on, leave a few seconds, and then simply rinse off. These types of cleaners are free of acids and will not damage your tires like some others on the market today.

Once you have completed this, it is on to the next performance car part; the rims. The first thing to do with the rims is to give them a good scrubbing to remove the dirt that has heavily set in to them. Then you should put some more cleaner onto the rims, and begin using the tire brush, and the toothbrush, to intricately scrub the area. You may have to repeat this a few times to make sure there are no spots that you missed.

You should always remember to thoroughly dry off your rims and tires before putting any kind of preservative on the tires. This way there is not left over residue such as cleaner that will get locked into the tire through the preservative.

Drivers of modified cars are finding it more and more difficult to show off their artistic masterpieces on streets all across the US. California may have led the way in cracking down on what the state terms as traffic offenses, but other states are following suit. No one can argue that the modifications in these modified cars have gone way beyond what was being done to the original hot rods, but should these modifications really be illegal? Are they really hurting anybody?

While it is true that some enthusiasts have juiced up their engines using illegal means, it is also true that most of those modified cars that have been singled out were not initially pulled over for speeding infractions. In fact, the crackdown on modified cars seems to stem more from an aesthetic problem than anything else.

Many of the violators have been ticketed for exceeding the noise pollution laws. Drivers of modified cars counter that they are being singled out because of unfair comparisons to the drivers in such movies as The Fast and Furious. They claim that the portrayal of modified car enthusiasts in that movie series has caused a backlash against real life owners.

The police forces of not only California, but various other states deny that charge, however. They say that the new breed of modified cars presents a safety risk at high speeds whether it involves racing or not. They point to the increased level of accidents involving modified cars sporting darkly tinted windows, custom rims and wheels, and exhaust pipes. California has, of course, long been the center of the hot rod and modified car universe in America, but the crackdown is spreading all across the country.

But owners of modified cars don’t appear ready to roll over and play dead. In addition to flooding the internet to increase support for their side of the argument via blogs, forums and web sites, they are also attacking the problem via America’s greatest legacy: dissent.

For instance, modified car owners are attacking the crackdown in the state of Virginia with an online petition. The petition identifies the problem as stemming from the vague terminology in Virginia’s laws for modifying exhaust systems and suspension.

Modified cars have been targeted by law enforcement officers for decades. And it is certainly true that drivers of modified cars may be more tempted to engage in high speed racing than the rest of us.

The debate is sure to rage for some time as owners of modified cars feel unfairly singled out and as law enforcement officials feel compelled to make the streets as safe as possible for everyone. The divide between car enthusiasts and the police is likely to grow wider, however, as new and more exciting modifications are discovered.

With the company that has built its name to become one of the most respected manufacturers of top quality motorcycles around the world, there is no doubt that each Harley-Davidson part is assured to fit in the category: superior.

Harley-Davidson was founded in 1903 and had rolled-off thousands of motorcycles since then. For more than one century of motorcycle manufacturing, the company had gone through several times where its toughness is challenged. It is seemed obvious that Harley-Davidson has gone through all. But the real test is not within the company. The real test is outside- on the road where each Harley-Davidson motorcycle is being tested everyday several thousand times over- by Harley-Davidson motorcycle owners around the globe.

What makes each Harley-Davidson motorcycle a living legacy? The answer can be found in the motorcycle itself. From the overall look of the motorcycle, to the tinniest moving part inside the engine, Harley-Davidson is superb.

Of course, every Harley-Davidson part contributes on how the motorcycle performs. The suspension parts provide the smooth ride to the Harley. The seat gives the rider comfort while cruising down the road. The infamous v-engine gives each Harley-Davidson motorcycle the power to conquer roads. The handlebars give the motorcycle the stability that each rider needs. The paint provides the exterior look of the Harley.

The different decals make each Harley unique from another Harley. The wheels roll the motorcycle to any place of any terrain. The transmission parts give better run to the motorcycle. And every Harley-Davidson part contributes to how Harley behaves on the road.

It is not surprising that each Harley-Davidson owner would want to infuse a little something out of their personality to their motorcycle. This the reason why there are several Harley-Davidson parts available just to provide better performance to the motorcycle. There are also several Harley-Davidson parts that are made to transform the stunning Harley into a more interesting motorcycle on the road.

Some Harley-Davidson parts act as an accessory. Some of these are the fender trims and instrument trims that highlights the fender and the gauges to become more attractive; the exhaust system that makes each Harley look more sporty, saddlebag and sissy bar bag that act as an accessory and provide additional storage room, backrest pad that gives extra comfort while you ride, windshield that creates a tougher look on the motorcycle, and more.

With Harley-Davidson parts, your motorcycle can posses the best look possible.

Insurance—it’s everywhere. One can insure just about anything. Are tires an investment one needs to insure? Tire insurance, also called a road hazard policy, road hazard warranty, or tire reimbursement plan, is a rapidly growing industry in the automotive world.

Tire warranty plans pay in full or in part for the replacement or repair of damaged tires and/or rims from “road hazards.” Road hazards are defined as pot holes, debris, nails, wood, and other hazards found in the road. Curbs, sidewalks, and stone walls are not road hazards. This is an important distinction to consider when deciding if tire insurance is right for you (discussed further ahead).

Tire plans last for a specific period of time and tire wear tread-depth. Some plans last 2-3 years. Others can last 5 years or 60,000 miles. Several plans come with fixed amounts of coverage: $500 per year up to 4 years. Many contracts require three years of law school to comprehend. In terms of tread depth, a tire is usually considered worn out (and thus the plan null and void) at 2/32 to 3/32 of an inch.

Another important distinction is in the type of plan.

Tire reimbursement plans are just what they say. You, the plan holder, will be reimbursed after the claims process is finalized—usually 2-8 weeks. There is an out-of-pocket expense. These plans are often sold by new car dealerships. The prices can range from $300 to $600 dollars.

Road hazard policies operate similarly to reimbursement plans. However, some tire insurance providers, in partnership with the repair facility, may have a direct-pay relationship. Thus, there would be no out-of-pocket expense, except for applicable deductibles, and items not covered in part or in full. These plans are primarily sold by tire dealers and repairshops. The prices range from $10 to $30 per tire. They also can be based on a percentage of the cost of the tire: usually 12% to 15%.

Both types of plans have a number of variables, requiring a magnifying glass to read the fine print. Also, many are pro-rated warranties, covering only a percentage of the cost of the tire based on its wear.

Claims and Coverage: Depending on the plan, claims are initiated by the repair shop. The process is fairly smooth, although there can be a significant delay from the provider for authorization. This delay may be an hour or an entire weekend. This means that you’ll have to “ok” the tire replacement, and then hope it’s authorized for the full amount, or drive on your spare.

Some plans offer national coverage either among their service facilities or from other repair centers. Claims procedures will vary. Others only provide local coverage, or coverage at the selling facility.

Limitations: Tire insurance does not mean that everything is covered. Pro-rated warranties are based on the wear and tear of the tire. You may get 75%, 50%, or only 10% coverage depending on the tread-depth. You’ll pay the remainder. While there are plans that offer full coverage, even these have limitations, or they may conflict with a repair shop’s policies.

For example, many plans allow for a maximum of $30 to mount and balance one tire, and a maximum of $15 to repair a tire. However, sport tires often have significantly higher mounting and balancing fees—upwards of $50 per tire—and tire repair prices can exceed $90. There are also discrepancies on the tire and rim prices themselves, which in the end, may have to be supplemented by the service customer.

Although there usually is not an issue with the latter given the competitive market, the service center’s price mark up may be unacceptable to the plan provider. In this case, the service center needs to lower the price or you, the service customer, need to pay the difference—or go somewhere else. This does happen!

Rim Prices and Repairs: Rim replacement is becoming less frequent. With the high cost of aluminum wheels and sport wheel packages, tire insurers have opted to have them repaired. Repair will only be done if the rim does not hold air. What this means is that even if the rim is warped—enough to cause a vibration and even premature tire wear—they won’t replace it. Rather, they will send it out to be straightened and repaired.

Rims are replaced only if the damage is so extensive that the new tire, when mounted on the rim, won’t hold air. However, even in this case, especially if it’s an expensive sport wheel, they may still attempt to repair it.

Repairing rims is a bad option. While some rim repair is acceptable, badly warped or damaged rims will in no way ever be the same.

Alignments: If a car hits a road hazard hard enough, such as a pot hole, it’s wise to have the alignment checked. Road hazard policies and tire reimbursement plans do not cover alignments. The service customer will have to pay for this procedure.

Road Hazard Protection Positives: Some plans include tire rotations, wheel balancing, and nationwide coverage.

Myths:

1) “Can I pop all 4 tires and get a new set of tires?”

You can try. But this type of claim will trigger a number of red flags with the insurer. The policy holder will likely send out adjusters and/or require photographs. You will also have a difficult time explaining how a “road hazard” caused all 4 tire pop.

2) “New tires come with a road hazard warranty.”

New tires do come with a warranty by the tire manufacturer. However, it only covers defects in workmanship. New tire warranties do not cover punctures or damages from external sources. This is why “road hazard” protection is being pushed.

New tires are rarely defective. If there is a problem, it’s usually noticed when balancing the tire. Or, there is a drivability concern such as vibration or noise. If there’s a defect it’s generally caught right away, and the tire swapped out.

3) “It’s so cheap; it’s a no-brainer, right?”

Actually, the experts don’t agree with this statement.

The Economics of Tire Warranties: An article from the Washington Post by Terence O’Hara explains the economics of extended warranties and purchase protection plans in general. It is quite fitting for road hazard warranties. He writes:

“The decision to buy an extended warranty…defies the recommendations of economists, consumer advocates and product quality experts, who all warn that the plans rarely benefit consumers and are nearly always a waste of money.

‘[Extended warranties or purchase protection plans] make no rational sense,’ Harvard economist David Cutler said. ‘The implied probability [of having an issue with the product] has to be substantially greater than the risk that you can’t afford to fix it or replace it. If you’re buying a $400 item, for the overwhelming number of consumers that level of spending is not a risk you need to insure under any circumstances.’”

In short, road hazard warranties are a waste of money. Don’t insure that which you can afford to replace.

Numbers Game and Slim Chances: Like all insurance, tire insurance plans are a numbers game. However, this is a game you have a 98% chance of losing. Insider statistics show that the percentage of claims paid out by providers is as low a 2%.

Curbs: Another interesting note is that a lot of tire damage is caused by curbs. Curb damage is not covered under most road hazard policies. High granite curbs with sharp edges slice through tens of thousands of tires per year.

You Won’t Notice: Many people don’t even notice tire damage. Other than to see if the tires are holding air, who “really” looks at tires? Tires are subject to a whole host of external influences which cause bubbles, slices and gouges.

Despite the potential dangers of damaged tires, the damage very often does not translate into any noticeable drivability issue. The point is that if you don’t notice any tire damage you can’t benefit from the coverage.

Research Shows: Those raving about the benefits of a road hazard policy are the actual folks in the industry who stand to benefit from the sale. They’ll argue that it’s so cheap—only $10 to $20 per tire. Even so, for four tires, that’s $80 based on the “possibility,” the “chance,” of damaging a tire that meets the repair/replacement requirement protocols.

Auto Insurance: If a rim and tire has incurred significant damage, it’s quite likely that other problems have resulted as well. The first is that the vehicle may have been jarred out of alignment. Secondly, hub bearings, front end components: tie rods, spindles, ball joints, and a variety of other components may have sustained damage. In this case, auto insurance, which you are already paying for, will pay for everything—brand new.

Free Road Hazard Warranties: Many tires come with road hazard warranties FREE. In other words, in an effort to secure retailers, many tire distributors provide service centers FREE road hazard insurance. Some shops pass this on to their tire customers, others sell them. Ask if the tire “comes” with a road hazard protection policy. If not, request that one be provided at no additional charge. It’s worth a shot.

Also, some car manufacturers provide road hazard warranties FREE of charge for 12 months or 12,000 miles. If you’re buying a new car or even used, ask that the dealer provide a complimentary road hazard policy (after all the wheeling and dealing is done, of course), and just before you commit.

“What’s the best road hazard policy?” Money in “your” bank account.

You might think that 6 liters was enough to make the Corvette two-seater fast enough, but not for the competition department lurking inside GM. They wanted to be able to compete head-to-head with the European supercars in the international endurance races for sports cars.

To do so, they took a leaf out of Ford’s book. In the 1960s, when Ford found it could not compete with the smaller Ferraris at Le Mans with the 4.2 (ex-Indy) or 4.7 liter engines, they brought out their 7-liter mill. And it was so much bigger than the competition that they won. So the guys behind the Corvette decided to produce a 7-liter version of America’s favorite and most famous sports car.

By the way, the 7 liter Corvette more than competes with the Dodge Viper SRT-10, which could give the standard Corvette a bit of a run for its money. Of course, this is not just any old engine. This is a very special version of its GEN IV 7.0 liter V-8.

This 2006 Corvette is challenging for muscle car of the year with no less than 500 bhp on tap at 6,200 rpm. Maximum torque from this mammoth engine is 475 lb ft at 4,800 rpm. This is bound to be a stunner with a top speed of about 185 mph and 0-60 in under 4.0 seconds. GM expects the quarter-mile be under 12 seconds.

To give durability, the engine has been beefed up in a number of ways. First, the connecting rods and inlet valves are now made of titanium – these weigh about half as much as steel ones and are used in quite a number of high-performance engines. Because of the low weight, the titanium parts put less load on other critical parts of the engine - the crankshaft, bearings and in this case the valve gear as well. The titanium valves also allow the engine to rev faster safely.

In fact, titanium used to be an aerospace-only material because it was so expensive, but it is now bein gused more in exotic cars and the heads of golf clubs, helping the lesser pros feel not so outclassed by Tiger Woods as they might with ordinary drivers.

You will see that the Corvette 7 liter is intended for the race track by the fact that the engine has a dry sump lube system. A dry sump system prevents the oil in the oil pan from slopping away from the pick-up on fast cornering – the sort you can do only on a track – and thus damaging the main bearings.

Instead of staying in the oil pan, the oil is pumped out to a tank, and then pressure fed from there directly to the engine bearings and other critical areas. Definitely a system for top supercars.

The underpinnings of the car have also been beefed up with a new aluminum perimeter frame which reduces weight. Further weight reduction comes with a new magnesium engine sub-frame. To ensure the car is stiff enough, it will be available only as a hardtop. The front fenders and wheelarches are now carbon fiber composite panels, which also reduce weight.

But there’s more…

To get all that power onto the road, and to get it to stop, bigger wheels, tires and brakes have been fitted. The front brake discs are now 13.9 inch diameter, and 19 x 12 inch wide rims are used at the back; front wheels are 18 x 9.5 inches. Such massive rear tires for a car with 50:50 weight distribution suggest that the car will have a tendency to oversteer – smoky drifts could be the order of the day!

All-in-all, this is a really special car, developed to compete with the best.

After the 1900’s, the market for car wheels and rims has suddenly expanded. Today, most people want to modify their vehicle with the latest set of wheels. Wheels which are modified from the standard vehicle manufacturer wheels are called custom wheels. The overall look of the vehicle is changed as soon as you install a set of the trendiest custom wheels or rims. However, it is important that you choose the most appropriate wheels or rims for your vehicle.

Types of Custom Wheels and Rims

There are several kinds of wheels and rims available in the market. But you will have to make a choice keeping your vehicle in mind. You can get everything from spoke alloy wheels to the more superior chrome spinning wheels, which are the latest trend.

Appearance: In the case where you are just concerned about the appearance, then choose wheels and rims that suit your vehicle and add style to it. However if speed is your passion, then go for alloy wheels which are much lighter than chrome wheels. Alloy wheels will provide your vehicle with the desired performance. Alloys are best suited for city traffic, as they help to avoid overheating of the brake system.

To give sporty looks to your vehicle, install larger wheels and rims. You must choose the wheels that are matched with the bolt pattern of your vehicle. You should ask the salesperson to help you choose the right ones. This is essential because incorrectly installed custom wheels will create problems with the handling of your vehicle.

Pricing: With lower priced wheels, you will have to compromise on quality. If you want to purchase the most stylish and trendy custom wheels in a good quality for your vehicle, then it will cost you slightly more. Wheels and rims at online stores are slightly cheaper than at brick and mortar stores. However, the advantage of buying from a physical store is that you can see and check your wheels and rims before purchasing.

The most common way car enthusiasts modify their vehicles is to install a set of custom wheels. Automobile speed lovers, who are well aware of the performance benefits, opt for lighter, stronger or larger wheels. On the other hand, those who give preference to the looks of their vehicle opt for larger wheels, usually with a distinctive appearance.

There is no denying the fact that custom wheels and rims provide a unique and trendy look to your vehicle. However, it is also very important that the performance of your vehicle is not affected due to selecting the wrong set of wheels.

The tires and the spokes of the scooter will require daily inspection to ensure you have no problems, and that your ride will be a safe one. If you are faced with broken spokes, you should repair them right away to prevent additional breakage. If you have a flat tire, you will also need to have someone change it, plug it or repair it so you can continue riding the scooter. Riding the scooter with a flat tire is going to bend and chip the rims, the wheels, and will not provide you with the smooth ride you are accustomed.

For flat tires, there is a canister type of solution you can purchase which is known as fix a flat, which will fix flat tires, plugging holes in the rubber tire. The Fix a flat is a canister that will plug right into the tire, inflating the tire as it plugs the hole at the same time. The Fix a flat is going to work on the tires that are rubber, the same as your car. This type of repair is not going to work on the tire with a tube or the tire that has a major cut in it. Repairs to the tire that has a large gash will require replacement of the tire. Most all medical supply houses, and scooter retail outlets do make replacement tires easy to purchase.

Regular reviewing and maintenance of your tires will be required. If you are not using your scooter for long periods, you should at least have someone move the tires around, so they are not sitting on one portion of the tire for weeks on end. Dry rot is a problem for tires not used often. A scooter not used for three months at a time can easily have dry rot on the tire. Dry rot can be spotted by the cracks in the tires, which can easily then lead to air leaks.

To prevent the need to fix flat tires, to fix broken spokes, and to prevent dry rot on any scooter tire, you should consider the purchase of tires, which are solid. Solid tires are available with or without tread. Solid tires never require air. If you have tires that do require air, you can pump up the tires with a bike pump or with an air compressor.

A popular joke in the 1960s at full service gas stations was "filler up with Ethel and change the air in my tires." Today with the price of gasoline approaching $3.00 per gallon, why not replace the air in your tires. Not with air but with nitrogen. Filling your tires with nitrogen rather than air will improve gas mileage, help maintain correct tire pressure, keep tires 25% cooler, improve handling and performance and prolongs the life of your tires. NASCAR drivers use nitrogen in their tires for safety reasons, you can too.

Why should you stop putting air in your tires! Compressed air you find at tire shops, gas stations and the compressor you use at home have a high concentrations of water vapor. Compressing air concentrates the water in it and unless really efficient air dryers are used chances are there is water vapors in your tires. Water vapor absorbs and holds heat. This wet air plus heat can increase the pressure in your tires, causing highway blow outs, and is one of the reason you should check your tire pressure when they are cold.

This article is not about the nitrogen. It’s really about reducing oxygen and water vapor in your tires. The air in our tires is composed of 78% nitrogen, 21% oxygen and about 1% water vapor and other gases. When pure dry nitrogen is used to replace the air in your tires it improves fuel efficiency, handling and it will extend the life of steel rims or custom wheels and tires. By reducing oxygen and water vapor in your tires from 22% to less than 7%, your tires will maintain pressure three to four times longer. Plus it will keep you safer on the highway.

How does oxygen and water damage my rims and tires? Oxygen, especially at high temperatures and pressures, corrodes aluminum, steel wheels and rubber. This process is called oxidation. When oxidation occurs small particles of rust and aluminum oxidization in your steel or aluminum wheels can clog valve stems, causing them to leak. The oxidation can cause the surfaces of your wheel flange and tire beads not to seal properly causing another leak point.

Oxygen can also age the thin layer of rubber called the inner liner or radial ply. As the inner liner ages, more and more air migrates through the rubber, causing additional pressure losses. As oxygen migrates through rubber it can come in contact with steel belts and the steel bead causing them to rust.

While both nitrogen and oxygen can migrate through rubber, nitrogen does it much slower. It might take six months to lose a couple of pounds of nitrogen, compared to less than a month with wet compressed air. Dry nitrogen does not cause rust and corrosion on steel rims or aluminum custom wheels, and it does not degrade rubber like wet compressed air.

Where can I get nitrogen for my tires? Nitrogen is becoming very popular with long haul trucking. Some truck stops have nitrogen available for these big rigs either free or by paying a small fee. They use the same type pay stations that you see at gas stations except they are marked "Nitrogen". These nitrogen stations are then connected to large nitrogen cylinders near by.

You can also buy your own small inexpensive Nitrogen Tanks and have them filled at welding supply stores in your area. Another source for small nitrogen tanks is Paint Ball supply stores either local or on the internet. eBay is a good source. These small nitrogen tanks can be filled at welding supply stores and then easily plumbed to fill your tires. Use caution when handling these small nitrogen tanks as they can be filled to as much as 3000 psi. Also make sure the nitrogen tank you purchase has a regulator attached and it is set for about 50 psi.

Filling your own new tires with nitrogen is a simple process. Jack up one tire until it just clears the ground, remove the tire valve stem and allow the air in your tires to escape. Once all the air escapes install a new valve stem. Then simply fill your tires with nitrogen from your small nitrogen tank. Repeat the process with the other 3 tires. Do not forget your spare! Your tires should now have about 95% dry nitrogen and you have significantly reduced all the hazards and oxidation problems mentioned above.

If you own a tire store and would like to provide nitrogen for your customers buy a Ingersoll Rand Nitrogen Tire Inflation System.

A carryover from the previous year, 2005, the 2006 Toyota Corolla is a four-door, 5-passenger family sedan, or sports sedan. It is made available in four trims, which ranges from the CE to the XRS.

When this vehicle was introduced, the CE has been equipped with a standard 1.8 liter, I4, 126-horsepower engine that has the capability to achieve 32-mpg when in the city, and 41-mpg if driving on the highway. Standard for the line is a 5-speed manual transmission with overdrive, however, a 4-speed automatic transmission with drive is optional.

For the XRS, this trim has been equipped with a standard 1.8 liter, I4, 164-horsepower engine that is able to attain 26-mpg during city driving and 34-mpg while on the highway. Standard for this trim is the 6-speed manual transmission with overdrive.

The newest Toyota Corolla comes in one body style. This is a four-door sedan. The Toyota Corolla comes with the standard of 15-inch steel wheels, however, it still could make do with larger wheels and tires that would fill out the wheels well more than what it has now. Options for LE models are the aluminum 15-inch wheels. This sedan has a high trunk to be able to keep up with the vehicle’s high belt line.

According to Jim Lentz, Toyota Division group vice president and general manager, “Corolla has become the world’s favorite compact car by exceeding customers’ expectations for value, quality, and performance in this segment. With the XRS model introduced last year, Corolla is expanding its appeal to younger, performance-oriented buyers.”

The Toyota Corolla has taillights that perfectly match the shape of its headlights. Getting in and out of the automobile has been made easier with its door openings made reasonably wide. The Anti-lock Brake System (ABS) with Electronic Brake-force Distribution (EBD) is available. An additional plus for this model is it has a sunroof.

Within its interior, a passenger would have the feeling that not of a small vehicle. The interior also does not feel cheap unlike many compacts. Large and/or tall people might find the accommodations somewhat cramped up, however shorter people would find the Toyota Corolla’s interior and space fitting them perfectly. For average-sized adults, there is plenty of front legroom and headroom, and a decent amount of space in the back. [PRWEB]

tagTRAX: toyota corolla | wheels and tires | corolla | toyota | horsepower