The Jackrabbit tonneau cover by Pace Edwards is a retractable tonneau or as some may call a roll top. To briefly describe what a retractable cover is I will try to give you a rough idea. The tonneau itself is made from aluminum panels, which in this case are laminated with a water resistant padded polymer. It has sort of a leather look. The frame is powder coated aluminum. The cover slides in tracks which extend from front to back along your truck bed rails. It rolls up into a canister which is located at the front of your truck box, below the cab rear window. This particular model has the option of stopping every 12 inches along its route so you don’t have to open or close the cover all the way. Water is directed from the cover to the side rails and through drain hoses to the canister and then through drain hose out through small holes in plugs in your truck box.

This cover has been purchase many times and most people loved what they received. Some say it was easy to install others say, actually most said the instructions sucked. Some give advice to read the instructions all the way through, then read them again, while others say make sure you have all the parts then throw the instructions away so you don’t get confused. All in all, customers for this cover did the installation themselves and were rewarded with many compliments for a great looking tonneau cover.

If you have a bed liner you will probably have to do some modifications to install this cover. Usually where the canister sits is a likely place for changes to your bed liner. From what I read I would get some help installing the cover so you don’t end up scratching your truck and just to make the installation a whole lot easier. I have read, a middle age woman installed it herself with little problem. I guess being mechanically incline will help.

A lot of people say their truck bed stays dry while other complained about water getting in between the tailgate and the cover. Just off the top of my head, maybe some extra stick-on weather stripping may help as it does on some other tonneau covers.

Even with lousy directions and water leakage this cover has been highly regarded for its operation and looks.

The Jackrabbit tonneau cover by Pace Edwards is a retractable tonneau or as some may call a roll top. To briefly describe what a retractable cover is I will try to give you a rough idea. The tonneau itself is made from aluminum panels, which in this case are laminated with a water resistant padded polymer. It has sort of a leather look. The frame is powder coated aluminum. The cover slides in tracks which extend from front to back along your truck bed rails. It rolls up into a canister which is located at the front of your truck box, below the cab rear window. This particular model has the option of stopping every 12 inches along its route so you don’t have to open or close the cover all the way. Water is directed from the cover to the side rails and through drain hoses to the canister and then through drain hose out through small holes in plugs in your truck box.

This cover has been purchase many times and most people loved what they received. Some say it was easy to install others say, actually most said the instructions sucked. Some give advice to read the instructions all the way through, then read them again, while others say make sure you have all the parts then throw the instructions away so you don’t get confused. All in all, customers for this cover did the installation themselves and were rewarded with many compliments for a great looking tonneau cover.

If you have a bed liner you will probably have to do some modifications to install this cover. Usually where the canister sits is a likely place for changes to your bed liner. From what I read I would get some help installing the cover so you don’t end up scratching your truck and just to make the installation a whole lot easier. I have read, a middle age woman installed it herself with little problem. I guess being mechanically incline will help.

A lot of people say their truck bed stays dry while other complained about water getting in between the tailgate and the cover. Just off the top of my head, maybe some extra stick-on weather stripping may help as it does on some other tonneau covers.

Even with lousy directions and water leakage this cover has been highly regarded for its operation and looks.

The Extang Fulltilt tonneau cover has had so many personal good reviews it is hard to top. So many people who had purchased this cover were so pleased, it is hard to believe. They loved the function ability of it. They were ecstatic that it lifts on hinges with the aid of gas shocks. Lots of people loved the ability of being able to roll it up to accommodate a high load. It is also very easy to remove the lid completely if one feels the need. Many were very pleased with the quality of the Fulltilt.

There were a few problems such as some people had to add extra weather stripping along the cab end or the tailgate end. Most said the instructions were easy to follow but some said throw the instructions away because they are useless. Lots of people said their cargo area stayed dry even through long drives in the rain at highway speeds. Some said their cargo area did receive some water in similar situations. I myself think that you should take the time to make sure you have adequate weather stripping, this could solve this problem.

Even with the few problems, people were very happy with their purchase. The quality, the price, the look and the gas mileage they gained, to mention a few of the positive things. Just a little heads up but some actually contacted Extang about some problems such as the gap between the cover and the tailgate and the Rep for Extang sent them something to remedy the problem. Those customers were quite happy with the service they received.

Let me give you a brief description of the cover with some of its features. The cover is hinged at the cab and equipped with gas shocks. You can order it with snaps or with “peel & seal” J-Channel tongue and groove closure. The Fulltilt has an aluminum frame with spring-loaded bows. You are able to roll the tarp up or use it on its hinges. This lid also comes available in a toolbox edition.

If you are looking for easy access to your truck bed with hinges and the capability to roll the tarp up, I give this Fulltilt tonneau cover by Extang both thumbs up for quality and service.

A lot of these tonneau covers have been sold. Probably because they are inexpensive and they give you great access to your truck bed just by folding up the three piece design. The trifecta is custom made to fit the make model and year of the vehicle it is intended for. This cover is made of heavy duty vinyl sewn to an aluminum frame. This particular cover uses spring clamps to latch closed at the tailgate. It is kept secured with straps whiled opened up to the cab. You can drive with it opened or closed. This tonneau cover is shipped fully assembled and installs quickly and easily with no drilling. You get a 10 year tarp warranty and lifetime on the frame. Of course as with other lids it improves fuel mileage. So if you want quick easy access to your truck bed and without the heavy cost of a retractable, this cover is probably for you. Although security isn’t as good as a retractable, it does keep your cargo out of sight out of mind. If you have an over the rail bed liner you will probably have to do some minor cutting to get this cover to fit.

What others are saying about the Extang Trifecta Tonneau Cover!

No stretching, no snaps and completely removes in less than five minutes. You can’t beat that…. A great cover that is easy to install and use, their may be possible paint damage along the bed rails after time due to wear and tear…. Everything is great about this cover including cost, installation and quality, that is why I have purchase my second and third one…. Super easy to remove and put back on. As for looks about an eight on a scale from one to ten. Easy to install and sturdier than the Torzo…. One person complained the cover didn’t quite completely cover the stake holes, about a half inch left but still praised his cover…. Another person loved his tonneau cover but had complained about two missing clips. After then receiving the clips one bolt stripped quite easily but was overnighted a new clip…. Someone was very happy with their cover but said they had to buy extra weather stripping to go behind on the bed rails below the rear window…. This person speaks he did a lot of checking around before buying. The fit was good and it literally went on in 5 minutes no problems except… The rear spring clamps would not stay clipped up inside the aluminum arch rails. when you folded cover up, the clamps would swing down toward the cover unless a person on each side held them up. Extang is aware of problem and after 3 calls to them he ended up crimping the rails tighter together as they suggested to remedy the problem…. One person says he had this cover on his Tacoma for 3 weeks now and it works flawlessly and it was great with very little or no leaking in very hard rains. It has even been said that it stayed cool under the tonneau after being in the sun all. There were a few complaints on how after a while there was a little puffiness where the Extang trifecta tonneau cover folded. One person gives this advice “Be sure to follow the directions on the bars that warn you about the clamps. They should be clipped into the bars and as far to the sides as possible before folding the cover to avoid damage.”

In Summary

Hey come on. If you your hinge is covered with the soft material you are bound to get some puffiness. I just wanted you to know what to expect. Over all most people who purchased this tonneau absolutely loved their cover and how easy it was to install and the price they paid for it. A few did not like it because they thought it was very light weight, cheaply made so to speak. Others called this a benefit. They were after having snap up covers and loved how easy it was to get access to their truck bed with the trifecta. Some were after having a fiberglass tonneau and loved this one because it was so light and easy to take completely off. Many people have commented on how dry their bed was staying after hard rains. Just think about what cover will suit you as far as how and what you use your truck bed for. You can get a free report to help you decide what type of cover is best for you, by visiting my website mentioned in the resource text below.

(NC)-The winter months can play havoc on one of your most important investments — your car. Whether you drive a brand new sports car or a reliable family vehicle, regularly cleaning and protecting the car from harsh elements will help maximize the vehicle’s value and longevity. The automotive experts at Canadian Tire have these tips to help give your car a fresh start heading into spring and summer.

Wash and dry

• Rinse entire vehicle before washing to remove loose debris.
• Do not use dish or laundry soap as they strip away protective wax and natural oils in paint. For best results, use specially formulated car wash soaps like Simoniz Car Wash.
• Always use a clean soft wash mitt, brush or chenille pad, rinsing frequently to remove harmful debris. The Simoniz Details Accessory Kit, available at Canadian Tire, has everything you need to safely and efficiently clean your car without harming the paint.
• Use two buckets – one for your car wash and use a separate bucket for rinsing the wash mitt.
• Start drying immediately after washing and rinsing to prevent water spots using a soft microfibre or cotton towel, chamois, PVA towel, or a silicone squeegee.
• Don’t forget to dry doorjambs and under the trunk lid.

Wax and polish

• Automotive waxes create a protective shield for the car’s paint against harmful elements like acid rain, UV rays, bugs, tar and tree sap.
• For best results, wax in warm dry weather in a shaded area. Do not wax the vehicle in direct sunlight.
• Always apply wax with a clean, fresh applicator and buff with a terry towel or diaper cloth.
• For a truly superior shine, clean your paint prior to waxing with a clay bar from Meguiars or Mothers.
• To help reduce time and effort, use an electric polisher. For an effective and more consistent application, try any of the Simoniz Random Orbit Polishers. They use less wax than working by hand and avoid causing paint damage from overbuffing

Interior & Exterior Cleaning

• Tire dressings restore the glossy black look of tires. Michelin’s Tire Care replaces ingredients in your tires that are depleted over time.
• Use only ammonia-free glass cleaner on your car’s windows, as ammonia will damage window tinting.
• Protectants help to nourish the vinyl and rubber on your car and protect it from UV ray damage. Try using protectant on the car’s weather-stripping, it will help protect it from the elements and prolong its life.
• Keep the air inside your car clean and fresh with an air purifier specially designed for drivers. The 12 Volt Air Purifier / Ionizer neutralizes unpleasant odors, smoke and other pollutants and plugs directly into the 12V cigarette lighter socket.

Source: News Canada