If you are someone that takes pride in your car or cars, and you install performance car parts, then you already know that you have to be able to take care of these parts. The most popular form of performance car parts is the tires and rims, which can be located and put on to any car ever made. If you go even a little bit of time such as a few weeks without cleaning these parts, it can make the look of your car go from hip to poor right away. Those wheels that have somewhat of a bright finish will look bad if there is an over abundance of brake dust that has accumulated itself on the rim.

If you are using a bleaching agent to clean these areas, you are actually doing more harm than you are good. When cleaning these areas you want to use a top quality washing soap, a wheel cleaner, a tire brush, and smaller brush, maybe even a toothbrush, to fully clean the smaller parts of your rims. When you are washing your car, you should always begin by cleaning your wheels and only do that once they have cooled off from your driving. You run the risk of staining your tires if you wash them when they are warm. You have bought these performance car parts, so you should also take care of them.

The type of cleaner that is recommended for cleaning the wheels are the types that you can spray on, leave a few seconds, and then simply rinse off. These types of cleaners are free of acids and will not damage your tires like some others on the market today.

Once you have completed this, it is on to the next performance car part; the rims. The first thing to do with the rims is to give them a good scrubbing to remove the dirt that has heavily set in to them. Then you should put some more cleaner onto the rims, and begin using the tire brush, and the toothbrush, to intricately scrub the area. You may have to repeat this a few times to make sure there are no spots that you missed.

You should always remember to thoroughly dry off your rims and tires before putting any kind of preservative on the tires. This way there is not left over residue such as cleaner that will get locked into the tire through the preservative.

Learning a little more about how to better care for your vehicles is a good idea for any number of reasons. It allows you to know if an unscrupulous mechanic is attempting to gouge you on your repairs – and that will save you money. It can prevent you from making unnecessary repairs – and that will save you money. It can help you locate a problem and fix it early, thus saving more money – sometimes a whole lot of money. It allows you to be more independent in an era where people are entirely too dependent on others to survive.

We need to get started now, so that we have time to cover everything…

First, do a visual check of your vehicle. The following will assist you in where to look, and for what:

•Look at your tires. Do they look low? A tire pressure gauge, available inexpensively at any discount store of auto parts store will help you make sure tire pressure stays dead on. Maintain as necessary. Better tire pressures will make your vehicle safer, and more fuel efficient. There are some very inexpensive air pumps for sale at discount stores – should you really want to stay on top of air pressure in your tires. Motorcyclists and moped riders need to be exceptionally concerned about their tire pressures.

•Look closely at your tires and inspect for severely worn edges, areas missing chunks of rubber, or objects sticking into the tire. Maintain or replace as necessary. If your tires are relatively new, and they seem to be wearing unevenly, take you vehicle into the shop for an alignment, and likely a tire rotation. These two things are frequently lumped together in less costly automotive service “specials.”

•Look under the vehicle for liquids. One drop usually means nothing. Look for consistent drip marks. Remember that during summer months your vehicle’s air conditioning will steadily drip water when in use – no worries. Your coolant system may also spew an occasional bit of water/anti-freeze, and that’s okay too. If you find a stain indicating long-term or consistent leaking, trace the leak to its source: engine oil, transmission fluid, rear end oil, etc. Maintain or repair as necessary. Sometimes, just getting under the vehicle with a pressure hose at the car wash will clean off years of old oil and debris that causes many ‘driveway’ leaks – thus fixing the faux leak.

•Visually check your engine oil. Check it according to the manufacturer’s instructions, and also feel it with your fingers. Engine oil is the life blood of your vehicle’s power plant. Does the oil feel thick, or does it feel watery. Thick is good, watery is bad! Change watery oil (and be sure to use an Engine Sentry when you do change oil and filter). Add the appropriate oil if the level registers low. NEVER overfill your oil!

•Check the coolant level. Be sure to use caution, and follow the manufacturer’s instructions to avoid injury from hot, pressurized liquids. Maintain as necessary. If you haven’t had your coolant/anti-freeze checked lately, it might be advisable. Be sure to never add coolant or anti-freeze that is not recommended by your vehicle’s manufacturer. Some radiators require special products so as not to erode or corrode them.

•Visually check your engine compartment. Tighten caps, firmly tug/test hose connections, look for worn things, things that have blown into the engine compartment, etc. Maintain or repair as necessary. This is also a good time to do light engine cleaning. Nothing too serious, just some rags and some degreaser: ammonia and water make a cheap, great degreaser, but it shouldn’t be used on aluminum – certainly not left on it. A toothbrush is also an excellent tool here – it makes quick work of much engine debris.

•Visually check your automotive battery and connections. Make sure the connections feel tight at the battery. If you have green or white build-up on the battery, mix some baking soda with tepid water (1/4-cup of baking soda to one quart of water) and stir it thoroughly. Now, slowly pour it directly over the affected areas. Don’t worry about all the fizzing and crackling – it’s just cleaning. Make sure you do this where the runoff won’t harm anything. An old toothbrush will make this go faster. When the terminals are clean and dry, apply a thin coating of automotive grease onto each battery terminal, and connection. Automotive grease comes in small, plastic tubs that weigh about a pound each. They’re cheap, so get a good brand name. I use popsicle sticks to spread it with. Grease is good to have around for many automotive fixes and preventive maintenance actions.

Okay, you’ve completed the first steps of becoming a full-fledged automotive diagnostician – or something like that, anyway. You’ve definitely gotten your vehicle in much better condition, and you should have learned a thing or two. Keep an eye out for part II – Hear No Evil, and Part III – Smell No Evil.

Engine Sentry is a registered trademark of Iron Horseman Technologies. Iron Horseman Technologies is the trademark of Iron Horseman Technologies in Tucson, Arizona.

We’ve all been there. You wake up late, jump out of bed and run, toothbrush in you mouth and fumbling with your keys to the car. You’re late for work. But no worries mate. You have your “avoid jail altogether card” sitting on your dash. You radar detector blinks to life as you shove the key into the ignition and you smile for the first time that morning.

Ever sine we watched Smokey and the Bandit, we’ve learned to love our little dashboard buddies that keep us ahead of the police and speeding tickets. The uses of radar detectors have grown from being our illegal sidekick to helping weathermen gauge the next storm surge or scientists track an unidentified object on the ocean floor or in the skies above us. We have also seen the uses of radar detectors snatched wholeheartedly by the military.

Although the design of radar detectors that are used by the military vary from those that can be carried in a car for a green light to speed, they use the same radio waves to detect the speed and direction of missiles, both in the air or under the water. The beacon what blinks on the console that seems to be the center of attention in all those submarine movies is nothing but an example of radar at work, keeping track of any threats or debris in the water around the craft.

Ever wanted to know what’s on the ocean floor in the Bermuda Triangle? How about looking for proof of the lost city of Atlantis? Well, thanks to another use of the radar detector, we have a chance at seeing these mysterious geographic areas firsthand. Scientists would possibly be able to send unmanned underwater vehicles down to take pictures of the ocean floor and the surrounding area. The scientists would be able to wait at a safe distance while the radar detector mapped out the scene for them, returning its findings to the receiver on the ship.

Radar detectors are also used to map and predict weather patterns. How can a radar detector that tracks dense objects like missiles and speeding cars track a cloud’s movement, you ask? Well, by increasing the amplification of the radio waves that are received, we can get a clear picture of the less dense objects floating above us in the sky. Our ability to track and gauge the severity of storms can help us to avoid situations like Katrina and the multitude of weather-related tragedies the news throws at us everyday.

Keeping our eyes on outer space can also be assisted by radar detectors. Mission control stations all over the world have receivers and detectors searching for audible, physical and visual phenomenon outside of our ozone layer.

So go ahead, speed if you’re late for work. Use that radar detector. But remember, just because you CAN speed, doesn’t mean you SHOULD. Why not put that radar detector to better use looking for treasure in the lake behind your house?