Ideally, you should change your motor oil every three months or after every 3,000 miles. If you often drive around in hot or dusty conditions, you might even want to change oil more often than that.

The process is pretty simple, and as easy as one-two-three. Step one is getting ready, step two is draining the oil and changing the oil filter while step three is installing the new oil.

(1) Getting Ready

When getting ready, it is important to have the right tools and materials on hand, such as jack stands, a socket set and an oil drain pan. Let your car engine run for 10 minutes before you drain the oil since warm oil is easier to drain than cold. Make sure you park on a level surface or, if your car has a low clearance, jack it up or drive it onto a ramp. If youre jacking up the car, use two jack stands instead of one. (An additional jack costs about $20 and that is a small price to pay to spare your face from being squished by a badly balanced car.) You might want to check your cars manual about the weight of oil and type of oil filter you need to use.

(2) Draining the Oil and Changing the Oil Filter

To drain the oil, crawl under the car and look for the oil drain plug under the engine near the front of the car. Position your pan beneath the plug then use a socket wrench to loosen the plug, turning counterclockwise. Once loosened, you can use your hand to remove the plug and the hot oil starts pouring out. Make sure all the old oil is drained into the pan. Once its completely drained, wipe the drain plug and the plug opening. Now replace the drain plug gasket and use a wrench to reinstall the plug but dont make it too tight.

Next, look for the oil filter. They are usually at the side of the engine. Place the oil pan beneath the filter in case any oil remains. Unscrew the oil filter (use gloves if it is too hot) and wipe the filter area clean, especially where it mounts to the engine. Dab a bit of your new oil on the rubber seal of the new filter and then screw it in by hand. You dont have to use a wrench to tighten the oil filter.

(3) Installing New Oil

Remove the oil filler cap thats located at the top of the engine. Position the funnel at the opening and slowly start pouring in the new oil You might want to check your manual for the proper oil capacity but, typically, you will need four or five quarts of oil. Once youre done, put back the oil filler cap. Start the engine, let it run for a minute and then check the dipstick. If you need to, add more oil. Now check for any leaks near the oil drain plug and the filter. If you do find leaks, simply tighten the plug or oil filter.

Youre done. But dont forget to clean up. Carefully wipe away any excess oil and put the old oil into a plastic container then dispose of it. Dont just pour it anywhere, though. Better to take it to the recycle center or other authorized locations.

Gas powered Scooters are making a comeback as the preferred mode of transportation.

No longer are they just for kids. Gas powered scooters are rapidly taking over as the preferred method of transportation to work and school. They are economical, can maneuver through tight spaces and with a gas scooter, you can take short-cuts that an automobile can not.

Gas powered scooters are also known as mopeds which is a two-wheeled (normally) low powered vehicle. In most states its small size and low power output allow it to escape many of the licensing, insurance, and driver restrictions placed on motorcycles. However, be careful of the true description of moped.

a. A moped is traditionally defined as a motorized 2 wheel vehicle that is part human and part motor driven. A moped has pedals so that it can be propelled by human power. As you can see, gas powered scooters do not fit most states definition of moped.

Don’t fret though, a gas scooter used properly will not get you into any trouble in most places. If used responsibly and traffic laws are obeyed, most law enforcement won’t touch you.

Gas scooters were first introduced in the mid 1950’s. The first design was little more than a bicycle with an engine mounted on it, it was called a cyclemotor. The cylcemotor can still be seen on the road these days in the form of electric bikes.

One reason some people have a gas scooter is to circumvent loosing a driver’s license. Many states don’t require a driver to have an operator’s license if they are over eighteen years of age, sixteen in some states. They also don’t require insurance and registration.

Gas powered scooters have several advantage that should be noted.

a. No parking spots required. Some gas powered scooters can fold down for easy storage right in your office, or you can tie it up at the door with the bicycles right in front of the buildings door or on the sidewalk.

b. A gas powered scooter is faster than the average electric scooter. They can travel at speeds up to thirty-five miles an hour.

c. Gas powered scooters can maneuver rather well – A gas powered scooter is a great way to move through traffic. They dart in and out between cars, especially gridlocked traffic. Imagine sleeping in an extra twenty-thirty minutes. With the time you save avoiding traffic, you can afford to. how smart are you?

d. Gas scooters have very cool body styles; some gas powered scooters look more like miniature motorcycles than scooters.

e. Gas scooters save tons of money - While the cost of gassing up gas powered scooters might seem expensive compared to the low cost of running an electric scooter, the mileage they get quickly makes up for the gallon of gas they require.

f. Maintenance is a breeze– A Gas scooter is easy to maintain. With a basic grasp of tools and a decent book about mechanics most people are able to maintain their gas powered scooters in their own garage.

The best thing about a gas scooter is the freedom to literally go just about anywhere. While you ride your scooter along the trail or the beach, you can go more places than most automobiles. Hop on your new gas scooter and get ready for a new adventure. Take a minute and smell the roses or take in the sights like never before. What more could you ask for?

Well I thought I seen it all in tonneau covers but now you can get a tonneau cover made from aluminum diamond tread plate. One thing you can be certain of, it won’t tear on you. These covers look pretty tough. They are made in polished aluminum, black or white painted finishes.

They are constructed with panels that fold up and lock in any open position. There is no need for a tailgate lock as when the panels are completely folded in the closed position, the last panel is made to come down over the tailgate. Once you lock the tonneau cover the tailgate cannot be opened. The hinges are made of aluminum and the hardware from stainless steel, keeping the tonneau cover rust proof.

For those of you who are looking for a tool box tonneau, Reds Beds have you covered. They seem to offer a tool box tonneau edition which accommodates a truck tool box. In addition to having a tonneau cover made from aluminum diamond tread plate this tonneau would look even tougher and give you a place to store tools and such.

Don’t have an aluminum truck tool box don’t fret here either as Reds Beds go all the way to offer you a tool box edition with a tool box combined. I guess this way you are assured the tool box will work with the tonneau cover.

You do have to wait a while longer for powder coat finishes but if that’s the look your going for I am quite sure you will be very happy with the finished product and the great new look you will add to your pickup truck. Whether you want the polished aluminum or the powder coat black or white, either way you go your going to have a great new look and an added look of toughness as well security for your cargo with the aluminum diamond tread plate tonneau cover by Reds Beds.

Extang are a leader in their field of manufacturing soft tonneau covers. They seem to be the manufacturer of the most different model soft covers on the market today. In my opinion they are still in business because they provide quality products at a reasonable price.

Extang produce everything you could want from roll up covers such as the low profile of their RT to snap up, velcro sealing system to folding lids as well as a hinged tonneau cover.

To briefly describe some of the products they have to offer I will start with their lowest price truck bed cover to their most expensive.

The Black Max is one lower price covers on the market today. It comes with a aluminum powder coated black frame and a snap up tarp which is adjustable for all seasons.

The Tuff tonneau III is the next in line price wise. This truck bed cover is a snapless lid that seals together using Extang’s J45 peel and seal system. They use a rotating tail rail that tightens up the tarp. This tarp also uses the spring loaded monster bows.

Next comes the Classic Platinum. This has an all aluminum frame which installs with clamps that are included. Extang boasts this cover to be made of an all-climate nylon and polymer tarp with stainless steel and brass snaps.

The Saber is next on the list which uses a peel-on design which attaches evenly to the entire frame to ensure the lowest possible fabric stress even during high speeds.

The tool box tonneau cover is a snap up lid with a leather grain black vinyl tarp. This tool box tonneau accepts a tool box between 18 and 21 inches deep. This is a no drill installation with and all aluminum frame and adjustable snaps to keep your tarp snug in different climates.

The RT and the RT Tool box models come at the same price. The RT low profile sits nearly flush to your truck bed. This cover rolls up quickly along with the bows to give you quick access to your truck bed. The RT has adjustable controls by the cab. It has a Velcro sealing system and secures your cargo with a locking rail. The tool box edition accepts a 20 inch tool box.

The next product they have to offer is a hinged tonneau called the Fulltilt. This one comes in both snap and snapless editions. The snapless is a few dollars more. This cover has hinges back by the cab and lifts up from behind on gas shocks. You can lift it up or roll it up or remove it without tools easily. This tonneau cover also comes in a tool box edition.

Another one Extang can be quite proud of is their Trifecta which is a folding tonneau cover. This truck bed cover folds up in sections from the back towards the cab giving you complete and easy access to your truck bed. This cover comes fully assembled and ready to mount on your truck.

The express model was designed to be just what the name implies, fast. Customers asked Extang in their reviews for fast and they gave them what they wanted. It rolls up or closed with integrated bows very quickly. The frame is a strong black anodized aluminum. The strong vinyl tarp seals with industrial strength Velcro.

If you are looking for a soft tonneau cover whether it is a roll-up, snap or snapless, hinged, folding or a tool box edition, Extang has you covered.

Truck tool boxes keep your gear from getting thrown around in your truck bed. The tool box is a reliable storage area to store the gear you don’t want to get damaged. You can also lock it to protect your valuable items.

It seems some of the more sought after boxes are the ones made from diamond aluminum tread plate and those made from stainless steel. These are usually polished or powder coat finishes. Others on the market are made from molded plastic products, and steel. There are a lot of these truck tool boxes on the back of pickup trucks all over United States and Canada.

Truck tool boxes come in all different shapes and sizes to suit your needs as well as specialty boxes, storage boxes and chests you can even use at home. There are some made to sit along the side of your truck, up under your truck and even models made to fit on the tongue of trailers. If you do any type of hunting that requires a dog, there are dog boxes available that are like a kennel underneath and a place to store your rifles, guns and other gear above. You can get single lid, double lid, shallow well, deep well, low profile and more. The trailer tongue storage boxes are very convenient allowing you to store items in an easy to get at place, protected from weather and thieves.

If you have a truck tool box or want to purchase one but also want a tonneau cover don’t despair because they make tonneau covers to suit truck tool boxes. This allows you the best of both worlds.

If you buy power tools or other electronic tools and carry them in your pickup truck, I don’t have to tell you how important it is to keep them dry and locked up. A truck tool box is the perfect answer. Not only is your gear locked up but just as important it is out of sight. Most of the time thieves don’t bother with what they can’t see.

For a great investment for your valuable gear, to keep it protected from the weather, thieves or to just keep it from rolling around in your truck bed, get yourself a truck tool box. You won’t be sorry you did.

Truck tool box tonneau covers are for people who want a tonneau cover but don’t really want to give up the advantage of owning a truck tool box. Owning a tonneau cover has some great advantages such as protecting your cargo from the weather and keeping your cargo out of sight from people who like to take things that don’t belong to them. A tonneau cover can also increase your gas mileage. With today’s gas prices this can make owning a tonneau cover all by itself worth the cost of purchasing one.

You can have all the advantages of owning a tonneau cover and still have a truck tool box to protect and store your tools. Different companies such as Extang with several different models of tool box tonneau covers which require you to either have a truck tool box or purchase one. Access also has a tool box edition which you also have to purchase or own a truck tool box.

Reds Beds offer an aluminum diamond plate tonneau cover which accepts a truck tool box but they also offer a diamond plate aluminum tonneau cover which includes an aluminum diamond plate truck tool box. Truxedo has the Truxedo plus which is a truck tool box tonneau cover with the truck tool box built into it.

Tools are expensive so you definitely want to keep them protected from the weather and keep them from rolling around in your truck bed. Truck tool boxes are made to do just that. The creation of the truck tool box tonneau cover was a great idea for those of us who wanted the advantage of both a tonneau cover and a truck tool box.

Whether you’re an avid hunter, fisherman or use your truck for work, you will find the truck tool box tonneau cover a great asset and you will wonder how you ever done with out one for so long.

We live in an age of information and technology that has made everything around us smarter. Electronic and digital components have made life easier in our homes, offices, and automobiles.

Some of life’s bells and whistles, like nose hair trimmers, are no more than budget-grabbing gizmos. However there are many intelligent tools that can bring convenience and safety to our daily tasks.

In the vast world of "smart" technology, the automotive electronics market is king. Indispensable features such as anti-lock braking systems and electronic stability control are perfect examples of smart and safe automotive electronics.

Recent developments by industry experts have created a huge increase in the number of electronic devices installed at automotive plants. Just to give you an idea of how quickly cars have evolved electronically, the Apollo 11 space craft traveled to the moon and back using a mere 150 kilobytes of onboard memory. It’s remarkable to think that the typical CD player uses a whopping 500 kilobytes just to keep our favorite songs from skipping.

Listening to uninterrupted music is a mere iota of how electronics have impacted a car’s performance in order to benefit drivers.

Telematics is the term used for the technology that involves automobile communication systems. The term was originally used to describe the blending of telecommunications and informatics or information technology. This industry has been gaining more and more attention from car manufacturers over the past years. In the mid-1990s, industry insiders predicted that telematics would become "the" go-to technology; increasing overall sales and more importantly, transforming the automotive industry into a major player in mobile technology. In reality, these forecasts panned out to be less than what was predicted. From an initial industry projection of over $40 billion dollars, the figure has been whittled down to half as more conservative measures were considered.

Nevertheless, that is by no means an indication that the development of this telematics technology has been or will be abandoned. In fact, on average automobile manufacturers spend $2000 on electronic systems for every vehicle that comes off the line — in incredible increase from the $110-per-car budget of the early 1970s. This huge increase in spending is reflected in everything from engine performance to entertainment systems, security features to safety devices. Every component of the vehicle works together to provide automobiles that perform better, are more comfortable, and ultimately safer to drive.

Some of the most common smart and safe automotive electronics are as follows:

Controller Area Network More than one computer runs your car. There is actually a network of computers called the Controller Area Network (CAN). Like a LAN (Local Area Network) that’s commonly used in home and business computers, the CAN links computers together. In your vehicle, the CAN basically links the many separate computer systems together and allows them communicate with each other. These interconnected systems involve everything from critical systems like engine management, cruise control and anti-lock brakes and cruise control, to less-demanding applications like automatic window and seat controls.

Fuel Efficiency Skyrocketing fuel prices have forced automotive manufacturers to realize the need for fuel-efficient vehicles, and to meet that demand. Smart automotive electronics are used to create the more efficient burning of fuel, such as the electronic fuel injection system (EFI).

The technology used in hybrid vehicles takes this one step further, with electronic devices that allow the driver to automatically switch between gas and electric engines.

Safety Devices There are generally two categories of devices designed to protect the safety of the driver and passengers: active and passive safety devices.

* Active safety devices: These are systems that constantly work to ensure the safety of drivers and passengers. Examples of active safety devices are dynamic steering response (DSR), traction control (TCS), and acceleration slip regulation (ASR).

While the average driver may not notice these systems at work, they are constantly sensing road and driving conditions and adjusting the car’s performance accordingly to create a safer ride. Electronic Stability Control has been shown by researchers to have a large safety benefit in reducing single vehicle skids.

* Passive safety devices: While these features may be more visible and seem simpler, they are also controlled by smart and safe automotive electronics. Thanks to developments in electronics and technology, airbag deployment has seen a tremendous amount of improvement over the years. Early airbags would deploy too early or too late, offering little or no benefit to the driver and passengers. Now, more advanced systems have created devices in your car that are actually programmed to the conditions that can lead to a high collision impact. Airbag and seating adjustment systems are deployed to minimize impact and decrease the degree of injury to the people inside the vehicle.

Think of the advancements over just a decade, and you’ll agree that the car of today certainly is a far cry from its predecessors. Modern automobiles offer more than simply a means of getting from point A to point B. Smart and safe automotive electronics make "getting there" as comfortable and as secure as possible.

If you ever wanted to buy or sell a car or any other type of vehicle, you should know that a great place where you can do all these things is the eBay motor car auction.

>From here, from this place, if you want to buy a car you can choose from all sort of models and prices. And the best thing about it is that you will have all the details, all the things you may want or need to know, right there in front of your eyes. No dealer eager to get more money will lie to you. All the facts will be placed on the Internet page, for everyone to see. The decision to whether buy the car or not will depend only on the buyer. You will not be influenced in any way by anyone.

Also, if you are trying to sell a car, the eBay motor car auction is the perfect place for you too. Don’t waste any more time looking for the best dealer that will help you sell that car of yours. The best place for a car that you want to sell fast and for a reasonable price is the eBay motor car auction.

Things that Buyers may Want to Know about eBay Motor Car Auction

The eBay motor car auction has some great features that you may want to know about. For example, there is a free buyer protection. Almost all vehicle purchases on eBay motors are protected up to $20,000. This kind of protection also occurs when you use PayPal to buy parts and accessories, and for these items you are protected up to $1,000.

There are all sort of tools that will help you decide what car to buy, and whether to buy it or not. You will also be able to check the seller’s reputation. If you find it unsatisfactory you can always decide not to bid. The recommendations on vehicle shipping, financing and insurance that eBay motor car auction provides will definitely help you make the best decision.

Things that Sellers may Want to Know about eBay Motor Car Auction

The eBay motor car auction has a worldwide audience. Over 10 million persons visit the eBay motor car auction site every month. This is indeed an appealing thought for someone that want’s to sell his car.

One more thing that you should know when deciding where to sell your vehicle is that on the eBay motor car auction a vehicle is sold every minute. This is indeed a great piece of information.

Learning a little more about how to better care for your vehicles is a good idea for any number of reasons. It allows you to know if an unscrupulous mechanic is attempting to gouge you on your repairs – and that will save you money. It can prevent you from making unnecessary repairs – and that will save you money. It can help you locate a problem and fix it early, thus saving more money – sometimes a whole lot of money. It allows you to be more independent in an era where people are entirely too dependent on others to survive.

We need to get started now, so that we have time to cover everything…

Some people are incredibly sensitive to the sounds their vehicles make. This is especially true of motorcyclists, those who refurbish vintage automobiles, and experienced mechanics. It’s a very worthwhile skill to develop. There are mechanics who can listen to a running car engine and tell if the timing is slightly off, or the injectors are not operating properly. While this is a very neat thing to be able to do, you do not have to elevate your listening skills to that lofty place in order to get benefits from listening to your vehicle.

Listen To the Engine (This is best done in relatively quiet surroundings until you get really good at it.) Open up the hood of your vehicle’s engine compartment. If necessary on your model, be sure to use the metal rod to lock the hood in the upright/open position. Now, start your engine. Allow the engine to run for 30-60 seconds before you start listening too hard. Also, there are many moving parts inside of engine compartments, don’t wear loose clothing, and mind all your fingers and hair! Safety first.

A brief word about engine sounds… All engines make sounds. Some sound like jets, and other have constant clicking noises, or humming, or clattering. Which sounds are consistently made, and are okay, are unique to your specific vehicle’s engine. The point being, don’t be alarmed the first time you really take a good listen to your engine. You’ll quickly learn the sounds that are okay, and the ones that are not.

You’re going to listen to your engine from three different positions: 1) Directly in front of the car. 2) On the left (driver’s side) side of the engine compartment. 3) On the right (passenger’s side) side of the engine compartment. I like to start I like to start on the left – right in front of the driver’s door.

Lean over the engine compartment (again – be careful with clothing, hair, and appendages) and listen carefully. Try closing your eyes to heighten your hearing. Listen for things that don’t sound ‘right.’ Such things might include: clattering, metal rubbing metal, clanging, and squeaks. If you hear such a thing, open your eyes and try to focus in on it – moving the position of your head and ears as your track the sound to its source. Repeat this process at all three positions previously described.

This method of checking your engine can reveal loose caps, loose fan belts, loose fans, missing bolts, nuts, and many other things. Correct what you are able to, and have anything else dealt with by a service technician. Don’t put your hands into your engine compartment to tighten something or check something while it is running. If you notice that the stays on the overflow tube are loose and rattling, turn off the engine before tightening.

Driving your car for a short distance over a good road with the radio and air conditioning off and the windows down is a good way to hear some other sounds. Clattering might mean you have a lug nut that came off, and it’s stuck inside the hubcap. A metal-rubbing-metal sound may be a stuck brake.

The last listening project/technique is the best – or at least so people tell me. This one requires a willing and able assistant. The two of you climb into the vehicle together – you drive, the assistant rides shotgun. The assistant will require four things: some WD-40, a notepad, a small can of 3-in-1 oil, and a good rag. Head for a road that isn’t so smooth, and simply drive along. The assistant listens for those irritating squeaks, squeals, and rattles.

The assistant should move around inside the vehicle, focusing on the sounds to locate their sources. One of the two lubricants will fix almost any squeaking – and the rag ensures a nice, tidy application of the chosen lubricant. Some things, such as loose or missing screws or bolts, should be recorded on the notepad for maintenance or repair later, when you get back home to the tools. You won’t believe how quiet your cockpit becomes after you perform this process once or twice.

Okay, you’ve completed another step in becoming a full-fledged automotive diagnostician – or something like that, anyway. You’ve definitely gotten your vehicle in much better condition, and you should have learned a thing or two. Check out Part I – See No Evil, and Part III – Smell No Evil.

It is a rare night that the evening news is not telling viewers about a new horrible effect that pollution is having on people, animals, and the environment. From cancer to acid rain and famine to smog, the culprit to blame is fossil fuels. Would it not be great if there was a viable, clean alternative fuel? There is. By learning how to make biodiesel fuel, people can provide themselves with all the energy they require and not harm the environment or their health.

Yet it is not just the environment that fossil fuels are harming. Year after year the fuel costs are on the rise, and each time they increase by a steeper percentage. These increases have hit merchants hard, and consumers even harder. Airlines have had to add fuel surcharges, shipping companies have increased their rates, and even taxis have felt the pinch. Of course, as shipping rates increase the price of goods also goes up. This means that consumers’ dollars don’t go as far and they are unable to purchase as many products. It is clear that this is bad news for the economy.

Of course, learning how to make biodiesel can solve this problem as well. By switching just one car to biodiesel fuel, the driver can save $30 per fill up. Considering that the average household owns two cars, and that each car is filled at least three times per month, this can lead to outstanding savings. In addition, heating a home with biodiesel rather than oil saves $75 per 500 liters. Consider how many more Christmas presents could be purchased next winter. Finally, using a diesel generator for peak electricity can save the average household $500 per year, which could be used for better food, nicer clothing, or even a much needed vacation.

When we consider the amount of money that could be saved, it is amazing that anyone would not want to discover how to make biodiesel. Instead of that money going straight to the coffer of an oil company, it would be dispersed throughout the global economy. The money would circulate and encourage growth, creating all the benefits of a healthy economy such as improved social services, increased productivity, and advancements in technology.

The production of biodiesel is not as complicated as it may sound. This technology has been used on farms around the world for many generations, but is only now gaining popularity in the mainstream. With the right information, this process can be easily established and anyone can start reaping the financial benefits of producing their own fuel. Using simple tools, easy to find ingredients, and uncomplicated techniques, learning how to make biodiesel is a lesson anyone can master.

A good place to get all the information you need is at http://www.ultimate-biodiesel-guide.com. Ultimate Biodiesel Guide is currently providing a comprehensive manual and over 200 pages of bonus material at a discounted price. While visiting the site, you can also subscribe to the informative newsletter, “Alternative Energy,” that provides ongoing updates on the world of alternative fuels.