Greg is an active 2 wheeled biker. The first time this person rode on one, this individual knew this was the best way to drive through the open road in the hopes of adventure.

When this individual got married, a part of this biker wanted to settle down and keep the memory of the past behind. This is the reason that this father of two would sometimes bring the kids out around the neighborhood to reminisce this memory.

State laws require the biker to wear a helmet when driving on the street. The passengers are also required to do the same even if the one in the back is a kid.

Greg knew that helmets for kids are not available where the motorcycle was purchased. This is because the place only sold models for adults so none of these will fit. The best place to go to then is the sports shop since people can get helmets for skateboarding and bicycling.

Here are tips to get the right motorcycle helmet for the kid.

· Before putting it on the child, it will be a good idea to check for defects such as cracks, loose padding, frayed straps or exposed metal that could be unsafe for the child.

· If its safe to put on, the parent must make sure that his will snugly go around the child’s head. If this is too heavy, this should be changed for something else. This should be worn for 30 minutes to make sure it is comfortable for those long trips.

· To prevent this from falling off, it is advisable to get the one that has strong straps with two rings so it can be securely fastened.

· The helmet for the kid should be just like the driver’s that come in bright colors such as red, yellow, white or orange. This should be made of reflective material that may have stickers in the back or in the sides making it easy for motorists in the back to notice there is a motorcycle in front many yards away.

· The best helmets to buy should be those that have a sticker inside certifying that this has gone numerous tests.

After about an hour in the shop, Greg was able to find two helmets for the kids. The family then went home so everyone can get on the bike and make that first road trip a few blocks away from where these people lived.

Ferdinand Porsche was an automobile engineer with more than a thousand patents to his name, and played an important role in the development of airplanes and the construction of tanks for the Wehrmacht as well. In the 1920s he was appointed chief engineer at Mercedes-Benz in Stuttgart and later set up his own engineering workshop. There he designed, among other things, the Volkswagen. He acted as chief of operations at the plant where the Volkswagen was made, Wolfsburg, and at the end of the war he was interned by the Allies.

He was released a few years later and immediately went to work building his first car with his son, Ferry Porsche. This car was named the Porsche 356, after Ferry, and was a sports car with styling reminiscent of the Volkswagen. In fact it had the same four-cylinder boxer engine, and wore it rear-mounted, just as the VW did. This meant that it was far from being a powerful sports car, boasting a mere 40 bhp and a maximum speed of 87 mph (140 km/h). Distinguished by its elegant and innovative body, the Porsche 356 was first produced as a convertible and then as a hard top. Father and son developed it in the workshop of Erwin Komenda, a master of restrained streamlining who had been in charge of sheet metal and design techniques for Ferdinand Porsche since the VW Beetle. This new style of closed coupe designed by Komenda soon became the embodiment of the sports car, due in part to its "fastback".

Erwin Komenda and Ferdinand "Butzi" Porsche, the founder’s grandson, continued this tradition with the 911.

The 911 became instantly recognizable: it had an attractive sloping bonnet reminiscent of the 356, what later became characterized as "frog eye" headlights, curves running from the top edge of the windscreen to the rear bumper, and a straight waistline. From a functional and technical point of view it shared more in common with a BMW 1500, but it retained the distinctive stylistic features of the original Porsche. The new 911 became the keystone of Porsche’s identity, even though the design was not always fully appreciated. During the 1970’s and 1980’s, many Porsche designers attempted to distance Porsche from its legendary design and nearly brought the company to the edge of disaster. The more modern 924 model, "a people’s Porsche", developed with Volkswagen, as well as the 928 fell short fulfilling expectations, and failed to allow the company to branch out in new directions and styles.

However, in the 1990’s the company seemed to realize that what some perceived as a stylistic straitjacket was in fact a market advantage. During this period Porsche embraced the timeless nature of classic styling to become highly profitable. Nearly forty people now worked in the design department solely dedicated to further improvement of the long running 911. Such developments included the 911 GTI, put forward by the in-house designer Anthony R. Hatter as a powerful combination of sports and racing car. In 1999, Porsche’s chief designer proudly unveiled the new Boxster, enabling Porsche to establish a second independent range of successful models.

According to BMW, the technique is called Flame Surface because it is “reminiscent of the forms of energetic flames, such as those from the burning of gas under pressure”. Flame Surfacing “gives body surfaces the freedom to turn in on themselves, lending a high degree of visual tension…a controlled tension whose energy pervades the entire visual image without in any way diminishing the vehicle’s overall harmony. [PRWEB Mar 20, 2005]