Looking for a novelty motorcycle helmet can be very challenging. Such motorcycle helmets can usually be found on motorcycle helmet specialty shops that offer unique design choices for the discriminating rider.

Novelty motorcycle helmets provide a very attractive addition to a rider’s getup. Whenever you want to go for a ride, use a novelty motorcycle helmet to get yourself noticed. Such helmets can make you very popular among other avid motorcycle riders in no time.

There are many ways that you can have your own novelty motorcycle helmet. There are many shops that offer you a selection of novelty designs that you might find very attractive indeed. If this fails, you can always have one custom made for you. You can have a certain design for a helmet in your mind and you might want to have one. The best thing for you to get one is by having one custom made. That way, even your choice designs are made to your exact specifications, giving you a helmet that looks and also feels good on you.

Once you have your own novelty motorcycle helmet to use, you should be able to know how to take good care of it. Such motorcycle helmets may be tough and sturdy but they should be handled as a fragile item. In cleaning your helmet, try using only the mildest soap recommended.

Avoid using petroleum-based cleaning fluids and agents on your helmets as they can cause the protective layer of your helmet to decompose. Try not to drop your helmet on hard surfaces. A dent on your helmet would be enough to cause you discomfort when you wear it and its safety and protective properties may be compromised.

Do not store your novelty motorcycle helmet near gasoline, cleaning fluids, or in places with excessive exhaust fumes and heat. Materials that make up your motorcycle helmet may react chemically in such environments and may be invisible to the naked eye.

Read instructions carefully about painting or decorating your helmet. The material composition of your motorcycle helmet can change if painted or applied with decals. Try also to avoid hanging your motorcycle helmet on your side mirrors, turn handles or sissy bar. This can damage the inner liner of your helmet which can make it unusable after a short time.

Try to follow these tips to ensure that your novelty motorcycle helmet continues to provide you with the comfort and protection that it was designed for. Care and awareness is important in prolonging the life of your helmet.

A car with an excellent paint job is one of life’s true joys. It’s like being the kid with the best bike in the neighbourhood or the biggest piece of birthday cake. Whether you drive a ‘47 Eldorado, a ‘66 Beetle or an ‘07 fortwo, a great paint job will take your vehicle from ho-hum to headturner.

Actually creating a great automotive paint job takes skill and finesse. Automotive painting is one of the most arduous and painstaking tasks in crafting an automobile. It can also be one of the most costly. If you are on a budget, there are options for you. Some paint shops can deliver a good paint job for a fair price. Your other option is to take on the task yourself. If the paint job is a success, you’ll have even more to brag about: a hot set of wheels AND a "do it yourself" tale to tell. Achieving a great paint job is a step-by-step process. You simply can’t rush automotive painting. Follow the basic steps of preparation, primer application, blocking, final paint coat and detail application. This can seem like a daunting task for any beginner, but the entire job can be completed in just a few days.

Prepare Before you begin, check with local bylaws and regulations regarding the use of spray paint in homes and enclosed areas. The last thing you need is a legal holdup delaying your painting job.

Cleaning the car is your next crucial step. The car must be spotlessly clean and free of dirt. Use detergents to clean the car top to bottom, and then follow up with grease removers. After the car has been cleaned, it’s time to begin sanding. An air sander (preferably a dual-action sander) should be used to remove the old paint from the car. This kind of sander will not cause body damage because it removes paint without digging like other sanders and grinders. Every trace of paint must be removed to create a perfect palette for your new paint job. Automotive detailing tape or even duct tape can be used to cover and protect other parts of the car, including plastic moldings and windows. In addition to removing the old paint, all traces of rust have to be sanded off. Rust will spread if ignored or untreated, and the last thing you want is body rot happening beneath your spiffy new paint. You can repair minor body flaws on the car’s surface using fillers. Shape the compound with care using a sanding board, then follow up with a glazing compound. This step will help to ensure a smooth-as-glass finish on your ride.

Mask After the whole car has been initially cleaned, then sanded, a final cleaning takes place and the vehicle is ready to be masked. In this step, every part of the car that shouldn’t be touched by paint is covered and protected. Remember, you will be using high-grade automotive paint that doesn’t wash off with water. Cover your windows, every light and reflector, all window rubbers, all chrome, tires, wheels, door handles, wipers.. take a good look and what needs to be masked. If you don’t want even the tiniest bit of over spray on it, cover it up! The tools and materials needed for masking are available at automotive supply warehouses and hardware stores.

Prime Priming is an essential step to providing a good foundation for your new paint. A flawless prime coat will help you to achieve a perfect paint job. Valspar epoxy is a good primer choice, combining dependable filling capabilities with minimal shrinking. After the primer has been applied, a second coat in a contrasting colour should be applied on top of the first layer. This will serve as a sanding guide. The primer should be sanded to a smooth finish, but don’t sand too vigorously or you could actually damage the body of the car. When the priming is complete, a sealer is applied and a final sanding takes place.

Finishing off In finishing off the automotive painting, it is essential to achieve uniform colour. The spray gun should be held ten to twelve inches away from the body to avoid streaks and runs. This is necessary when applying the basecoat, final coat and clear coat.

Regardless of the type of car you drive, a new paint job can turn it into a real showstopper. Automotive painting can be a time consuming task, but you can do it if you take it step by step. The creative energy will be good for your soul, and the compliments you receive will be great for your confidence.

A popular joke in the 1960s at full service gas stations was "filler up with Ethel and change the air in my tires." Today with the price of gasoline approaching $3.00 per gallon, why not replace the air in your tires. Not with air but with nitrogen. Filling your tires with nitrogen rather than air will improve gas mileage, help maintain correct tire pressure, keep tires 25% cooler, improve handling and performance and prolongs the life of your tires. NASCAR drivers use nitrogen in their tires for safety reasons, you can too.

Why should you stop putting air in your tires! Compressed air you find at tire shops, gas stations and the compressor you use at home have a high concentrations of water vapor. Compressing air concentrates the water in it and unless really efficient air dryers are used chances are there is water vapors in your tires. Water vapor absorbs and holds heat. This wet air plus heat can increase the pressure in your tires, causing highway blow outs, and is one of the reason you should check your tire pressure when they are cold.

This article is not about the nitrogen. It’s really about reducing oxygen and water vapor in your tires. The air in our tires is composed of 78% nitrogen, 21% oxygen and about 1% water vapor and other gases. When pure dry nitrogen is used to replace the air in your tires it improves fuel efficiency, handling and it will extend the life of steel rims or custom wheels and tires. By reducing oxygen and water vapor in your tires from 22% to less than 7%, your tires will maintain pressure three to four times longer. Plus it will keep you safer on the highway.

How does oxygen and water damage my rims and tires? Oxygen, especially at high temperatures and pressures, corrodes aluminum, steel wheels and rubber. This process is called oxidation. When oxidation occurs small particles of rust and aluminum oxidization in your steel or aluminum wheels can clog valve stems, causing them to leak. The oxidation can cause the surfaces of your wheel flange and tire beads not to seal properly causing another leak point.

Oxygen can also age the thin layer of rubber called the inner liner or radial ply. As the inner liner ages, more and more air migrates through the rubber, causing additional pressure losses. As oxygen migrates through rubber it can come in contact with steel belts and the steel bead causing them to rust.

While both nitrogen and oxygen can migrate through rubber, nitrogen does it much slower. It might take six months to lose a couple of pounds of nitrogen, compared to less than a month with wet compressed air. Dry nitrogen does not cause rust and corrosion on steel rims or aluminum custom wheels, and it does not degrade rubber like wet compressed air.

Where can I get nitrogen for my tires? Nitrogen is becoming very popular with long haul trucking. Some truck stops have nitrogen available for these big rigs either free or by paying a small fee. They use the same type pay stations that you see at gas stations except they are marked "Nitrogen". These nitrogen stations are then connected to large nitrogen cylinders near by.

You can also buy your own small inexpensive Nitrogen Tanks and have them filled at welding supply stores in your area. Another source for small nitrogen tanks is Paint Ball supply stores either local or on the internet. eBay is a good source. These small nitrogen tanks can be filled at welding supply stores and then easily plumbed to fill your tires. Use caution when handling these small nitrogen tanks as they can be filled to as much as 3000 psi. Also make sure the nitrogen tank you purchase has a regulator attached and it is set for about 50 psi.

Filling your own new tires with nitrogen is a simple process. Jack up one tire until it just clears the ground, remove the tire valve stem and allow the air in your tires to escape. Once all the air escapes install a new valve stem. Then simply fill your tires with nitrogen from your small nitrogen tank. Repeat the process with the other 3 tires. Do not forget your spare! Your tires should now have about 95% dry nitrogen and you have significantly reduced all the hazards and oxidation problems mentioned above.

If you own a tire store and would like to provide nitrogen for your customers buy a Ingersoll Rand Nitrogen Tire Inflation System.