Hyundai Sonata Review

It’s difficult to imagine, but Hyundai worries that even if it has one of the highest customer faithfullness ratings in the industry, attracting new purchasers into the showroom has been a real challenge. The new Sonata slogan is: “A Hyundai you’ve never seen before” and it is true that the Sonata which was redesigned has more power, more space and better fit and finish than it has ever had previously.

Its Advantages are:

- Acceleration - The possibility to avoid accidents - Comfort and convenience - Gas mileage

There are two acceptable disadvantages:

- Suspension noise - Handling

Reliability and Maintenance

The Sonata is easy to take care of, with very little in the way of programmed maintenance until 100,000 miles is reached, unlike oil changes at regular intervals.

It is backed by one of the longest powertrainn warranties in the automotive industry at 10 years or 100,000 miles.

Performance and Handling

The new Sonata is adequately equipped with a standard 4-cylinder which offers 162HP. The 3.3-liter V6 with 234HP is smooth but responsive and reaches average speed with little effort.

Acceleration is brisk in the four-cylinder and it is surprising in the V6. Hyundai officials say the V6 will turn 0-60 miles per hour times of about 7.5 seconds, with a maximum speed of 130 mph. Shifts are executed easily with the five-speed manual, and the front tires are chirped even more easily. Kicking down for passing with minimal hesitation, the Shiftronic automatic transmission moves between gears smoothly. When the engine bumps up against redline, and it declines to downshift at all, leaving that to the driver’s preferences,in manual mode, the Shiftronic will upshift automatically.

It provides more room and power than previous years. However, there is a least favourite feature, cheap interior look with fewer features, and new external redesign. But let’s see the positive aspects of Hyundai sonata.

Even if the interior seems cheap and bare compared to 2002-2005 models, seats are comfortable and the general aspect is all right for those who prefer simplicity. The on road performance and handling of this car is very good.

The Hyundai Sonata’s new interior marks a major step up the quality ladder. You can notice some rough edges on a few plastic molds and a less-than-lustrous finish on some dash panels. But the overall look is highly competitive with most in the class and better than some.

Three round dials in the hooded instrument cluster communicate the necessities of operational data to the driver, with the largest the speedometer which is positioned inside a polished circle. To its left is the tachometer, and to its right conjoined water temperature and fuel gauges. In the lower dash to the left of the steering column are a bank of five switch plugs, one of them is the dash-light rheostat, and there also can be seen a flip-down storage bin. The ignition key slides into a slot placed properly, in the dash to the right of the steering column instead of on the steering column itself.

The improvement of Renault, the inventor of the “Wind” roadster this year, is considered an interesting step because it reflexes the tendency into the roadster market in the future. There are many fascinating features of Wind developed under the “Touch Design” concept, such as the elegantly designed appearance that reflexes lively and the inner decorated with fine quality materials which reflexes class.

Neat, clean appearance consists of 2 main lines which are the bottom and top lines. Although the headlights’ shapes are plain, they are a significant part that helps empower the overall. Transparent windshield stuffed with blue and green lights similar to plane’s light, which are such brilliant. The green smoothly blended with the light blue or aquamarine of the body part is the individual characteristic of Wind. Fabulous 19-inch wheels and “245-35/ZR19” Michelin Pilot Sport 2 tires are another remarkable complement.

The most outstanding of it is the 3-seat capacity which is cocoon-curve shaped, light brown leather seat embraces the passengers and the driver.

Frill-designed seats are permanently installed, as well as the steering wheel and console that are adjustable and automatically roll out when the doors are opened, and that helps the passenger enter the car more easily. The center section linked with the back seat which is made of carbon fiber. It is layered with foam and leather, which can flip inside out in order to make the third seat.

Although it is a compact roadster, Wind contains wide and useful space. The rear space has 232 liters in capacity. Wind’s dimension consists of 3870 millimeters in length, 1750 millimeters in width, excluding the side windows, 1260 millimeters in height, and 2395 millimeters in wheel’s base’s length, as well as the 850 kilograms in weight.. The back seat has extra thick car soft-top attached with the rear curve-shaped window for protecting the passengers from rain and sunlight.

All Wind’s controlling devices are made of aluminum, which reflexes the sport characteristic. They are designed to be in round shape installed in the center of console. They contain control button, communicative device, stereo, and navigation system.

6-speed robotized gearbox is designed to be with the dashboard, while the shift gear is put on the steering wheel like the Formular-1’s. There is one gauge-meter made of cylinder-shaped glass. It is used for indicating the round-per-minute speed which is displaying the numbers in both analog and digital.

Air conditioner’s controller is designed to put on the inner driver’s door. Its engine is a 16-valve 2.0liters, 136 horsepower maximum, and 191 N/m torque. It is considered a low-pollution engine which qualifies the Euro-4 polluting gas production regulation. From the Wind’s information, it implies the effort to market the small roadster which has the outstanding in designs in color, capacity, and clean burning energy that is quite energetic. Most of its designs are in the draft stage, so if Renault has a plan to import this production, they need at least 2 years in development.

They use less fuel. They are much more efficient. They are much less polluting. And what’s more, they require much less maintenance. Yes, hybrids really do score better on all counts when compared to conventional vehicles. In fact not only do they need much less service, they are also made to run better and last longer. So you should take all these factors into consideration when you are making a choice. Let’s take a look at why they don’t need as much maintenance.

Firstly, they have fewer parts than a conventional car and hence, fewer parts to wear out. It’s the way they are built. There’s no regular starter and this technology means that there is one part less that needs to be replaced. No starter also means there is no chance of accidentally grinding the flywheel. The battery and the motor too do not require too much maintenance. The engine lasts longer than a conventional engine and requires as much maintenance perhaps as a conventional one. A hybrid does not need any valve adjustments done and even if there are valves, they do not get worn out because the engine does not run constantly. And the injectors do not need regular cleaning, in fact maybe they never need to be cleaned because there is hardly any deposit on them.

The hybrid car uses electricity to run the air-conditioning system unlike the conventional ones that use a traditional pulley that is driven off a gas motor. So this means there is no air-conditioning belt to wear out. There is also no belt used for the steering because it is not hydraulic but electric. So it has very little kickback even when driving over rough, uneven roads.

The hybrid car’s generator can multi-task. The generator is an important part of the hybrid car and there is a separate gas engine that powers it. A hybrid engine is really very small, maybe 10 to 20 horsepower and it is so designed that it gets maximum efficiency if it runs at one speed. Because the generator does many tasks, there is less wear and tear of the other parts and when braking or coasting, the car can recapture the energy. So there is no wastage of the battery and the battery does not need to be replaced very often. With the generator handling a lot of the braking – in fact 80% - it means that extends the life of the brakes too. There is also less chance of the rotors getting warped. Thanks to less of a heat build up, the life of the brake fluid is extended too and the brake pads last longer.

Hybrid cars also have warranties that are much longer. Most of the Toyota and Honda cars have much longer warranties on their hybrids than on the conventional ones. There’s an 8 year or an 80,000 mile warranty on the Honda Insight while for the Toyota Prius, you’ll get a 100,000 mile warranty or 8 years on the hybrid system and the battery. These longer warranties make the hybrid an attractive buy.

If you are making up your mind between a conventional car and a hybrid one, look at all the long-term advantages. Hybrids are built so they last longer and they don’t need as much looking after as a conventional car. Add to that the fact that they don’t guzzle as much gas and have fewer parts, therefore less maintenance and you’ll see why it makes good sense to decide in favor of the hybrid.

[Introduction]

Nitrous Oxide injection is a popular performance modification that offers maximum returns on spending. The direct outcome of using Nitrous Oxide injection is additional power to your vehicle. This results into better garnering of energy from combustion of fuel, revved up engine and eventual boost in over all performance of the vehicle.

Nitrous oxide is more popular than other performance modifications as besides better performance per unit of money spent, Nitrous installations are easier to accomplish. These installations can be used as and when the need arises. The Nitrous oxide injections are available to meet any magnitude of power need from 25 HP to over 500 extra HP. This performance option caters to the computer controlled fuel injected engines. The Nitrous systems are portable enough to be easily removed or transferred to another vehicle. In comparison to other performance options, Nitrous Oxide systems are feasible, as they cost least and install without much difficulty. To install NOS, all you need are some common hand tools and barely three to four hours time. There is no other performance option that can buy you more performance for lesser money than Nitrous.

Nitrous oxide is colorless, non-flammable and a slightly sweet smelling gas. Also known as laughing gas because of its euphoric effects, Nitrous is also known as NOS after the famous trademark catering Nitrous Oxide injection systems.

[How Does It Work?]

Nitrous oxides functions along identical principle as followed by sodium chlorate upon heating. It constitutes of two parts of Nitrogen and one part of Oxygen (N2O). When Nitrous Oxide is heated to a temperature of about 570 degrees F (~300 degree C), it splits into oxygen and nitrogen. So, injection of Nitrous oxide into the engine results into more oxygen available during combustion. As there is more oxygen available during combustion, the engine can also intake more fuel, and consequently generate more power. Thus, Nitrous oxide is one of the simplest manners to give a substantial horsepower boost to any gasoline engine.

Secondly, when pressurized Nitrous oxide is injected into the intake manifold, it boils and vaporizes. As a result, Nitrous oxide provides significant cooling effect on the intake air. With the cooling effect, the temperature of the intake air reduces by 60-75 degrees F. This in turn, increases air density and subsequent higher concentration of oxygen inside the cylinder. Thus additional power is generated. As per standard rule, every 10 degrees F reduction in intake charge temperature causes 1% increase in power. For example, a 350 HP engine with an intake temperature drop of 70 degrees F shall gain around 25HP on the cooling affect alone.

Thirdly, the nitrogen released during the process of heating also supports the performance aspect. As Nitrogen dampens down the increased cylinder pressure, it controls the combustion process eventually.

Nitrous oxide is colossal just like any other gas. Even its liquid form does not excuse the bulky nature of the gas. The engine requires a huge quantity of Nitrous Oxide to keep the 5-liter engine running at 4,000 rotations per minute (RPM). The speed of 4,000-RPM rate is secured by combustion of 10,000 liters of air every minute. In sharp contrast, the engine consumes only 0.2 liters of gasoline. In nutshell, the engine shall require magnanimous quantity of Nitrous oxide to run your vehicle continuously. Therefore, a car normally carries limited amount of nitrous oxide, which is used very selectively by the driver, by pushing a button.

Nitrous system offers improvement of 1 to 3 full seconds and 10 to 15 MPH in the quarter mile. Other factors viz. engine size, tires, jetting, gearing etc. determine the final results. It is best used with a wide-open throttle, unless a progressive controller is used. It can be safely applied above 2,500 rotations per minute (RPM) under full throttle conditions.

Forged aluminum pistons are one of the best modifications to complement NOS. Other important modifications may be a forged crankshaft, a high quality race type connecting rod, a high output fuel pump dedicated to feeding the additional fuel demands of Nitrous system and a racing fuel with high specific gravity and an octane rating of 110 or more.

For effective performance through Nitrous Oxide, it is important to choose the correct Horse Power for a given application. To elaborate, as the energy will be released in the cylinder, the load on various components to perform will also increase proportionately. If the energy released is greater than the ability to handle the energy, it will amount to wear and tear of the machinery. While 4 cyl. engines allow an extra 40-60 HP, 6 cyl. engines allow 75-100 extra HP only. On identical lines, while small blocks V8’s (302/350/400cid) typically allow up to 140 extra HP, big blocks V8’s (427/454) accept from 125–200 extra HP.

As Nitrous looses the optimal flow rate at very cold temperatures, NOS kit has a nitrous pressure gauge that allows you to monitor the pressure to approximately 800-900 psi. In colder climates, it is always advisable to purchase a bottle heater kit, part # 14161 to keep the ambient temperature to 70-90 degrees F.

Further, the condition of the engine is important to keep in mind while choosing NOS kit for your vehicle. A worn out and poorly tuned up vehicle will not be able to sustain NOS pressure and will be instead harmed by abnormal wear.

Though the button triggering on Nitrous oxide may be held pressed until the bottle containing it is rendered empty, it is recommended that Nitrous Oxide may be used for 15 continuous seconds or lesser. The Nitrous bottle can be easily refilled from any NOS certified distributor. The NOS bottle must not be overfilled as overfilling and/ or too much heat can result into excessive bottle pressures, following a blown out safety seal and eventual release of all the contents out of the bottle.

[Summary]

To wrap up, Nitrous Oxide magnifies the output of any engine – be it stock engine or modified engine, to lend more power and better performance. However, it is important to keep the condition and horsepower of the engine in mind before introducing particular NOS to it to secure positive results only.

Citroen C5 is the large sedan car for adults who crazy about the French style automotive design. The exterior of C5 shows memorable and dignified image. Large front lights are designed by the aerodynamic theory and the few gradient of its make the luxurious feeling. Besides, Front Citroen logo, hood, fender and front bumper are designed to create the car’s image modern. This is the French blending between with classic style and modern style actually.

The report news described about C5 which began manufactured in 2003 that Citroen spend 6,900 million franc to invest in the R&D process and the marketing survey. The C5’s factory, which can produce 920 cars per day, is on Rennes-la-Janais of France. It uses the new platform that developing process take time 3 year. C5 is designed by modern design technology, and it received the strict safety standard and environment standard. The suspension kit, uses the 3rd generation Hydrative system which is entity of Citroen, can reduce the vibration well and it has good road surface gripping attribute.

Citroen had offered three C5’s engine choice. First choice is the V6 benzene engine which has 3,000cc plunger’s capacity with 24 valves. It can generate 152 Kw or 210 Hp. powers at 6,000 rpm, 285 Newton-meters or 30 kilogram-meters torque at 3750 rpm and 232 Km/Hr maximum speed. And the distinctive thing of this engine is VTC (Variable Timing Camshaft) system which can control open-close degree of valves by accelerating rate and engine’s cycle.

Second choice is the benzene straight engine which has 2,000cc plunger’s capacity with 16 valves. It can generates 100 Kw or 138 Hp. powers at 6,000 rpm, 190 Newton-meters or 19.8 kilogram-meters torque at 4,100 rpm and 202 Km/Hr maximum speed.

And the last choice is the 2.0 HDi diesel engine which has a high pressure diesel injection system and common-rail nozzles. It can generate 80 Kw or 110 Hp. powers at 4,000 rpm, 275 Newton-meters torque at 1,750 rpm and 188 Km/Hr. maximum speed. The direct-injection with common-rail high pressure pump which is controlled by ECU and the Variable Geometry Turbo Charger give the good performance on every speed and reduce 20 percent of gasoline usage. And additional merit of C5’s diesel engine is the low loudness like the benzene engine. Also that HDi engine gives better responsibility than old version because the gasoline feeding accord with the engine need.

Furthermore, the 3rd generation Hydractive suspension kit was developed by Citroen which increase the vibrate reduction, road surface gripping and driving performance. It is cooperated between electronic devices which are controlled by computer unit and the improved hydraulic system. It has 4 modes for appropriate usability. H mode for the wheel changing, P mode for the hitch crossing, N mode for the normal driving and B mode for the high-loading.

If you interested Citroen C5, you can ask a near car dealer. You should check the C5’s current price from car magazine or websites before you will buy it. Because different models have different prices.

If you would like a car that looks almost ordinary, but that is as fast as many supercars, buy the BMW M5. Yes, on the outside, this is an ordinary European sedan – but under the hood is a 500 bhp V-10 engine that you might imagine came from a sports-racing car! Will it do 180 mph? No, it could, but it won’t because BMW uses a limiter to prevent you going faster than 155 mph on all its hot cars. Actually, BMW says it will do over 190 mph without the limiter in operation.

The BMW M5 is powered by a very advanced 5.0 liter V-10 engine, ad fits neatly into the standard engine compartment. This is a very special engine, being built in small numbers and at high cost by BMW’s M Center. It’s a 90-degree V-10, which means that it won’t be quite as smooth as some – in theory, at any rate.

ADVANCED 500 BHP V10 ENGINE

Maximum power is 500 bhp at 7,700 rpm – a real screamer this – while the maximum torque of 380 lb ft is produced at 6,100 rpm. Boy, you’re really going to keep this revving if you want to use all that power. Still, when it’s just mooching along at 4,000 rpm, this amazing unit produces quite a chunk of power.

Needless to say, it has all the features you’d expect in a supercar engine, such as a stiff aluminum block, twin overhead camshafts per bank of cylinders and and narrow 4-valve heads. BMW uses its variable valve timing system, and drives the inlet camshafts on each bank by chain, with a gear drive to the exhaust camshaft, a system pioneered by Toyota to save space.

SEVEN-SPEED SEQUENTIAL GEARBOX

Coupled to this marvel of a power plant, which would seem more at home in a slinky coupe, is a seven-speed sequential gearbox. This is the latest development of the BMW sporty semi-automatic. BMW claims it’s the first seven-speed box of its type. Mercedes-Benz has a seven-speed automatic, and Audi has a CVT with seven stages, but these are not quite the same.

Why all these seven-speed boxes? Well, for maximum acceleration, and so that you have the right gear coming out of any corner, the more gears the better. When you’ve got that many gears, the shift pattern gets pretty complicated with a manual box, so they’re going for either automatics or semi-automatics.

To go with the powerful power train are bigger brakes than standard, wider wheels and tires, and stiffer suspension. The handling is surprisingly good for such an ordinary-looking car.

HOT PERFORMER, QUIET LOOKS

The result of putting this engine in the BMW 5 Series is very hot acceleration for such a big car: 0-60 in 4.7 seconds, and 0-125 mph in 15.6 seconds.

Will people pay over $100,000 or so for a 500 bhp sedan? You bet they will. There are a lot of people out there that want supercar performance, but don’t’ want to have to struggle to get in and out of the car. They also want to travel with plenty of luggage, and have room in the trunk for two sets of golf clubs – and more.

And they’ll get a real kick from burning off cheeky guys in sports cars who get in the way. Cars that are much faster than they look, which we used to call Q cars, have quite a market. What’s it like to drive? Well, at normal speeds, the car is very quiet, and you would not know how power you had. In fact, there is a switch on the steering wheel which limits power to 400 bhp. To get the full 500 bhp, you need to press that.

So, most of the time you’ll drive with 400 bhp, and the problem is that the engine does not have a lot of power until you get to 5,000 rpm, an the power keeps coming in until you get to 8,000 rpm. You need deserted roads to use that power, but the car works pretty well in traffic and normal commuting. Not quite so good in everyday use is the gearbox. It does not have a torque converter, so it can be quite jerky when you shift up.

DIESELS are still gaining popularity in Europe, thanks to low gas mileage and good performance. The latest diesel cars can take on gasoline engined cars and come out on top!

All turbocharged diesels generate much more torque than gasoline engines, so you get better mid-range acceleration. In other words, from, say, 40-80 mph, a good diesel will see off a good gasoline engine car of the same apparent performance.

Jaguar has introduced a special version of a V-6 2.7 liter diesel that has been developed in Europe jointly by Ford and Peugeot. This is the most advanced diesel around at present, with the brand-new piezo-electric injector operation, the latest common rail injection system and twin turbochargers.

PIEZO-ELECTRIC INJECTORS

What are piezo-electric injectors? Cunning little ceramic devices, and when an electric current is applied they produce a pressure, and so can be used to force fuel into the cylinders. The thing is that they can be operated four times faster than other electro-mechanical injectors so the injector can be opened and closed incredibly quickly. Also, the amount of movement is very small, and you get less noise that you get from mechanical injectors.

Like I said, very cunning, and they all go with high pressure injection to give high power, low noise, emissions and gas mileage. It’s developments like these that mean we’ll have some diesels in Fast-Autos soon - but not a lot!

As a result, the fuel is injected at horrendously high pressures with incredible accuracy. The result? Masses of power, and almost no smoke, the weakness of old-fashioned oil burners, like the dreadful engines GM introduced about 20 years ago.

This new Jaguar S-Type diesel, develops 206 bhp so it lives up to the Jaguar tradition of high performance. Maximum torque is 320 lb ft (430 Nm) which is more than the 4.2 liter gasoline engine can manage without a turbocharger. Although performance is not sensational, it is definitely not what you’d expect from a diesel.

The Jag diesel will push the S-Type automatic up to 60 mph in about 8 seconds, and top speed is 140 mph. You’ll get the idea that Jag regards this as a sporty engine from the fact that it has a six-speed manual or automatic box - both are supplied by ZF. Of course, the most powerful S-Type is the S-Type R.

BMW HAS AN EVEN MORE POWERFUL DIESEL

BMW is also ready with a very powerful 3.0 liter diesel engine which turns out 272 bhp, which would be considered very nice thank you from most makers of 3.0 liter gasoline engines - Ford’s top version of its nice 3.0 liter V-6 develops 225 bhp. BMW uses twin-stage turbocharging to get this much power. In this system, one small turbocharger provides power at low speeds, and a bigger turbo is matched to high speed requirement. It is switched in when the speed and load increase sufficiently, and so can generate as much power as a gasoline engine of the same size.

If that is not enough power consider the latest news. Audi is racing diesel-powered cars at the Le Mans 24-hour race! These V-12 engines develop more than 600 bhp, and will challenge the best gasoline engined sports-racing cars.

You might think that 6 liters was enough to make the Corvette two-seater fast enough, but not for the competition department lurking inside GM. They wanted to be able to compete head-to-head with the European supercars in the international endurance races for sports cars.

To do so, they took a leaf out of Ford’s book. In the 1960s, when Ford found it could not compete with the smaller Ferraris at Le Mans with the 4.2 (ex-Indy) or 4.7 liter engines, they brought out their 7-liter mill. And it was so much bigger than the competition that they won. So the guys behind the Corvette decided to produce a 7-liter version of America’s favorite and most famous sports car.

By the way, the 7 liter Corvette more than competes with the Dodge Viper SRT-10, which could give the standard Corvette a bit of a run for its money. Of course, this is not just any old engine. This is a very special version of its GEN IV 7.0 liter V-8.

This 2006 Corvette is challenging for muscle car of the year with no less than 500 bhp on tap at 6,200 rpm. Maximum torque from this mammoth engine is 475 lb ft at 4,800 rpm. This is bound to be a stunner with a top speed of about 185 mph and 0-60 in under 4.0 seconds. GM expects the quarter-mile be under 12 seconds.

To give durability, the engine has been beefed up in a number of ways. First, the connecting rods and inlet valves are now made of titanium – these weigh about half as much as steel ones and are used in quite a number of high-performance engines. Because of the low weight, the titanium parts put less load on other critical parts of the engine - the crankshaft, bearings and in this case the valve gear as well. The titanium valves also allow the engine to rev faster safely.

In fact, titanium used to be an aerospace-only material because it was so expensive, but it is now bein gused more in exotic cars and the heads of golf clubs, helping the lesser pros feel not so outclassed by Tiger Woods as they might with ordinary drivers.

You will see that the Corvette 7 liter is intended for the race track by the fact that the engine has a dry sump lube system. A dry sump system prevents the oil in the oil pan from slopping away from the pick-up on fast cornering – the sort you can do only on a track – and thus damaging the main bearings.

Instead of staying in the oil pan, the oil is pumped out to a tank, and then pressure fed from there directly to the engine bearings and other critical areas. Definitely a system for top supercars.

The underpinnings of the car have also been beefed up with a new aluminum perimeter frame which reduces weight. Further weight reduction comes with a new magnesium engine sub-frame. To ensure the car is stiff enough, it will be available only as a hardtop. The front fenders and wheelarches are now carbon fiber composite panels, which also reduce weight.

But there’s more…

To get all that power onto the road, and to get it to stop, bigger wheels, tires and brakes have been fitted. The front brake discs are now 13.9 inch diameter, and 19 x 12 inch wide rims are used at the back; front wheels are 18 x 9.5 inches. Such massive rear tires for a car with 50:50 weight distribution suggest that the car will have a tendency to oversteer – smoky drifts could be the order of the day!

All-in-all, this is a really special car, developed to compete with the best.

Type R model expected in Derby by early spring.

THE hotly-anticipated Honda Civic Type R will go on sale in March and everything points to it being well worth the wait.

Honda promises that it will be just as exhilarating to drive as the outgoing Type R while being a more refined super hatchback, with improved comfort levels.

Integrated styling and handling tuned for enhanced responsiveness and predictability are among its other strengths.

The model will be powered by the naturally-aspirated, high-revving 2.0-litre i-VTEC engine that powers the current Type R, but the unit has been significantly reworked to improve responsiveness using a new balancer shaft and drive-by-wire throttle control.

Maximum power is now 201PS, reached at 8.000rpm (previously 200PS at 7.400rpm) and Honda reports the car is more responsive generally, while improved aerodynamics ensure it cuts through the air more cleanly. Slightly lower gearing compensates for a small increase in kerb weight.

Acceleration figures are expected to be virtually identical to the 6.6 second 0-62mph time of the outgoing car - and the new car should match its top speed too, powering on to 146mph.

There’s little doubt the model will attract much attention in the street thanks in part to seven-spoke 18-inch alloy wheels and a deep front spoiler incorporating a larger air intake.

A body-coloured tailgate rear spoiler follows the kick-up line from the rear quarter windows in providing added down-force. At the front, a black honeycomb mesh grille replaces the glass panel of other Civics.

While more discreet than on the outgoing car, Type R logos feature throughout.

Firstly, the front brake callipers wear the insignia, and stainless steel inserts on the door sills also carry the badge. Inside, it’s all about the driving experience. Front seats are racing-style buckets with large black alcantara bolsters and red stitching, red fabric seat cushions and backs.

The effective dual-zone, two tier dash, which is common to other Civic models, also features in the latest Type R, but with red illuminated dials set off by gun-metal effect switch panels on either side of the central display. The gearshift knob with aluminium-finish has a black boot with red stitching. Expect to see the new model at Lookers Honda in Derby next March. Prices have yet to be announced.

Ferdinand Porsche was an automobile engineer with more than a thousand patents to his name, and played an important role in the development of airplanes and the construction of tanks for the Wehrmacht as well. In the 1920s he was appointed chief engineer at Mercedes-Benz in Stuttgart and later set up his own engineering workshop. There he designed, among other things, the Volkswagen. He acted as chief of operations at the plant where the Volkswagen was made, Wolfsburg, and at the end of the war he was interned by the Allies.

He was released a few years later and immediately went to work building his first car with his son, Ferry Porsche. This car was named the Porsche 356, after Ferry, and was a sports car with styling reminiscent of the Volkswagen. In fact it had the same four-cylinder boxer engine, and wore it rear-mounted, just as the VW did. This meant that it was far from being a powerful sports car, boasting a mere 40 bhp and a maximum speed of 87 mph (140 km/h). Distinguished by its elegant and innovative body, the Porsche 356 was first produced as a convertible and then as a hard top. Father and son developed it in the workshop of Erwin Komenda, a master of restrained streamlining who had been in charge of sheet metal and design techniques for Ferdinand Porsche since the VW Beetle. This new style of closed coupe designed by Komenda soon became the embodiment of the sports car, due in part to its "fastback".

Erwin Komenda and Ferdinand "Butzi" Porsche, the founder’s grandson, continued this tradition with the 911.

The 911 became instantly recognizable: it had an attractive sloping bonnet reminiscent of the 356, what later became characterized as "frog eye" headlights, curves running from the top edge of the windscreen to the rear bumper, and a straight waistline. From a functional and technical point of view it shared more in common with a BMW 1500, but it retained the distinctive stylistic features of the original Porsche. The new 911 became the keystone of Porsche’s identity, even though the design was not always fully appreciated. During the 1970’s and 1980’s, many Porsche designers attempted to distance Porsche from its legendary design and nearly brought the company to the edge of disaster. The more modern 924 model, "a people’s Porsche", developed with Volkswagen, as well as the 928 fell short fulfilling expectations, and failed to allow the company to branch out in new directions and styles.

However, in the 1990’s the company seemed to realize that what some perceived as a stylistic straitjacket was in fact a market advantage. During this period Porsche embraced the timeless nature of classic styling to become highly profitable. Nearly forty people now worked in the design department solely dedicated to further improvement of the long running 911. Such developments included the 911 GTI, put forward by the in-house designer Anthony R. Hatter as a powerful combination of sports and racing car. In 1999, Porsche’s chief designer proudly unveiled the new Boxster, enabling Porsche to establish a second independent range of successful models.