RC car painting is typically done using one of two methods: spray cans or an airbrush. Needless to say your skill level will be the ultimate determining factor since most people just aren’t that familiar with the intricacies of airbrushing. Both methods have their particular idiosyncratic advantages and disadvantages, however.

RC car painting via spray cans is the choice of many not only because they either don’t have access to an airbrush or know how to use one, but also because it can be done quickly. A huge amount of space can be covered relatively quickly with a spray can. But RC car painting isn’t the same thing as changing the color of a flag pole.

You want to be proud of that car and make it look as good as it runs. Although personalizing and detailing can usually done much better by airbrush, if you take your time and plan ahead, your spray can RC car painting can wind up looking quite impressive.

Of course, RC car painting with an airbrush is ultimately what you should aim for. The benefits of using an airbrush is that you have access to so many more colors than you can get from using spray cans. And that’s saying a lot, because even if you do choose to use spray cans, you’ll still have over fifty different colors from to pick. But when RC car painting with an airbrush, you can exponentially expand those choices through mixing and blending.

In addition to more flexible use of coloring, airbrushing also affords more control in application. Unlike spray cans, an airbrush can be adjusted, allowing you to spray the paint as thickly or thinly as you like.

The downside to using an airbrush, besides your own level of artistic ability, is cost. For RC car painting with an airbrush you’ll need a compressor. You can try using canned air to begin with, but you’ll quickly find yourself spending more money than you planned on saving because they empty pretty quickly. Better to shell out for an actual compressor, preferably one that produces 25 to 70 psi. By pass the 1/8 HP hobby compressors and go for the ½ HP. Since most RC car painting is now done with next generation water-based paints, also make sure the compressor comes with a moisture trap; if it doesn’t, you’ll quickly find car covered in thick gobs of paint.

RC car painting with an airbrush requires not just air, obviously, but brushes. Ideally, you will want to own more than one brush, but since they can be pricy—the good ones anyway—you may just want to start off with one. The reason for owing two is pretty obvious. RC car painting at its finest creates a work of art that combines both thick lines and fine lines, therefore you want a brush for both thicknesses.

In addition, the paint itself comes in various thickness and some of the finer brushes just handle the thicker paints at the psi the compressor puts out. RC car painting with an airbrush obviously requires more effort, time and expense than RC car painting with spray cans, but the end result usually shows.

“It’s all about beating the clock.” This quote comes from a wise old service manager, advising me on how to maximize my income as a flat-rate technician. If you have ever wondered why your car doesn’t get fixed correctly, or all your concerns weren’t addressed, you can blame, in part, the flat-rate pay structure.

Flat-rate simply means that your mechanic is paid a flat fee for a particular repair, regardless of how long the repair actually takes. In other words, if your car needs a water pump, which pays two hours of labor, and the mechanic completes the job in one hour, he gets paid for two.

In theory, this can work to your advantage. If the job takes longer, you still only pay the “predetermined” labor amount. In THEORY, not reality!

The flat-rate pay structure is designed to drive productivity. It’s very effective. The flat-rate pay system encourages technicians to work hard and fast, but it does not promote quality.

In terms of getting your car fixed correctly, the flat-rate pay structure has disastrous effects. Flat-rate technicians are constantly looking for shortcuts to beat the clock in order to maximize the number of hours they bill. Experienced flat-rate technicians can bill anywhere from 16 to 50 hours in an 8 hour day.

It’s these shortcuts and the breakneck speed at which flat rate technicians work that result in some of the most idiotic mistakes. In the rapid-fire pace of a shop I’ve witnessed technicians start engines with no oil. I’ve seen transmissions dropped, smashing into little pieces onto the shop floor. And I’ve seen cars driven right through bay doors—all in the name of “beating the clock.”

Flat-rate technicians can get quite elaborate with shortcuts. My favorite was the implementation of an 6-foot-long 2-by-4, which was placed under the engine for support while a motor mount was removed. It made a job predetermined to take 1.5 hours achievable in twenty minutes. A win-win, right? The technician makes extra money; you get your car back faster.

Actually, in many cases the placement of this 2-by-4 damaged the oil pan. Moreover, it caused the car, your car, to balance precariously 6 feet in the air, while the technician manipulated the car lift to access your engine mount.

This tactic was abruptly discontinued when a technician’s 2-by-4 snapped causing the car to crash nose down onto the concrete floor.

Sometimes the shortcuts create very subtle disturbances, which create problems overtime. A quick example: a vehicle had its transmission serviced with a new filter, gasket, and fluid. During the procedure, the technician was able to save time by bending the transmission dipstick tube slightly, in order to get the transmission pan out faster. The vehicle was reassembled, and the technician re-bent the tube back into place and off it went—no worries….

Six months later, the vehicle returned with an intermittent misfire. The engine wasn’t running on all cylinders. After extensive diagnostics, it was discovered that the transmission dipstick tube had chaffed through the engine harness, intermittently grounding out an injector. Hmm, that’s strange. Don’t usually see that.

The high-speed environment and the subsequent shortcuts illustrate the devastating effects of the flat-rate, sales-driven pay structure on the quality of car repairs.

No wonder even an oil change gets screwed up!

The poor quality of work encouraged by the flat rate pay structure is disconcerting enough. Unfortunately, it doesn’t stop here. The negative effects of flat-rate get exponentially worse, as it opens “wide” the door to rip you off!

The power of the internet in all areas of our lives continues to grow exponentially, especially in financial areas like auto insurance. Since 48 states adopted laws requiring drivers to obtain auto insurance, providers have been seeking easier and more efficient ways to offer auto insurance quotes to potential consumers. [PRWEB Sep 27, 2005]

See also: Free Auto Insurance Quote