Over time, the media has elevated the popularity of various vehicles by highlighting some of the fictional rides that have graced the pages of novels, the lyrics of songs, the 30-minute TV show, and the silver screen. Whether Fred and Wilma are peddling around in their signature rockmobile, James Bond gets away with his gadget cars or the Beach Boys bring life to the Little Deuce Coupe, it’s sometimes hard to forget that many of these fictional cars really don’t exist. Below are a few examples that have gained fame throughout the years.

Batmobile

In both the Batman television shows and movies, the superhero-on-the-go often hopped into a sleek, customized vehicle that provided protection for his Bruce Wayne alter ego. Equipped with heavy armor plating and a high performance engine, the evolution of the Batman series displayed increasing levels of gadgets. To reach increased speeds, the Batmobile sometimes offered rocket boosts, while additional weapons and a computerized assistance helped to keep villains at a distance.

KITT

The talking car that aided David Hasselhoff’s character, Michael Knight, navigate through a sea of enemies and bad guys was a Pontiac Trans Am. The television series focused on a high-tech approach to entertain the audience. Numerous fans watched the show just to see what KITT would do or say next. The popularity of the show even helped to boost Pontiac car sales as the verbal wonder could drive without a passenger and even displayed its own set of entertaining stunts.

Christine

Stephen King has produced numerous novels that have become popular movies; the same is true with the 1958 Plymouth Fury that seemed to have a mind of its own. Christine was the name given to the car that appeared in the horror novel (with the same name) published in 1983. Driven by supernatural forces, the antique auto created havoc in both the novel and the movie.

Herbie

Several Disney movies and cartoons have focused on Herbie the Lovebug, which was a Volkswagon Beetle that made its first appearance in 1969. Just like Christine, the red, white, and blue striped car with a “53” on its side could also drive without assistance and had a reputation for acting on its own. Most of the time, the car was featured in some sort of racing competition.

General Lee

The television series and movie named the Dukes of Hazzard showed main characters, Bo and Luke Duke soaring through the air, causing mischief with their get-rich schemes. Their vehicle of choice was a colorful Dodge Charger that allowed the cousins to complete high jumps in almost every episode. The car is also known for its controversial Confederate flag decoration.

Weight is one of the most important issues to consider when building a fast car for road or track. Putting a car on a serious diet is pretty much free horsepower, as any attempt to lighten a car improves the power to weight ratio, this seriously improves acceleration.

The gains on a lightening a car are huge and not just limited to gains in acceleration either. Once you have lightened a fast car you will find the car performs better in the corners and under braking, parts such as brakes and tires will last longer on the car also.

The potential gains are huge but it must be done correctly, you would not want to lighten a rear wheel drive car too much on the rear or you may find traction a problem particularly with a high power output.

The truth is your fast car could be made a great deal faster cheaply and easily just by shaving a few pounds off the body.

How do we remove weight from the fast car?

This bit is as easy as you want it to be, but as with most forms of car modification it depends on how far you want to go. I know a guy who races a BMW and he decided to go all out on weight saving, he even scraped every bit of under-seal from the floors of the car, extreme perhaps but he managed to remove nearly 2 stone of under-seal, not a bad effort.

The obvious place to start saving weight on your fast car is by removing the interior, and anything else that you do not need, the front seats can be replaced with light weight racing items, the unused wiring removed, carpets and sound deadening, pretty much all of the unnecessary parts, my car has just a driver seat and a cage with much of the unnecessary wiring removed. This makes for a car with very impressive performance.

Many other components can be replaced with lighter parts, gear box casings, axle covers etc. It is worth noting that a stainless steel exhaust is lighter than the same in mild steel, so this constitutes a worthwhile investment.

It is also important to reduce the unsprung weight on the car also, by this I mean wheels, brakes and anything else before the suspension mounts, this provides a very good increase in the handling of the car.

Modern Formula One cars are mid-engined open cockpit, open wheel single-seaters. The chassis is made largely of carbon fibre composites, rendering it light but extremely stiff and strong. The whole car, including engine, fluids and driver weighs only 605 kg. In fact this is the minimum weight set by the regulations – the cars are so light that they often have to be ballasted up to this minimum weight.

The cornering speed of Formula One cars is largely determined by the aerodynamic downforce that they generate, which pushes the car down onto the track. This is provided by ‘wings’ mounted at the front and rear of the vehicle, and by ground effect created by the movement of air under the flat bottom of the car.

A significant difference in the design of the latest breeds of F1 cars is that they make far greater use of vortex “lift,” or in this case, downforce. Since a vortex is a rotating fluid that creates a low pressure zone at its center, creating vortices lowers the overall local pressure of the air.

Since low pressure is what is desired under the car, allowing normal atmospheric pressure to press the car down from the top, by creating vortices, downforce can be augmented while still staying within the rules.

The aerodynamic design of the cars is very heavily constrained to limit performance and the current generation of cars sport a large number of small winglets, “barge boards” and turning vanes designed to closely control the flow of the air over, under and around the car. The “barge boards” in particular are designed, shaped, configured, adjusted and positioned not to create downforce directly, as with a conventional wing or underbody venturi. They are designed so that air spillage from their edges will create these vortices.

The other major factor controlling the cornering speed of the cars is the design of the tyres. Tyres in Formula One are not ’slicks’ (tyres with no tread pattern) as in most other circuit racing series. Each tyre has four large circumferential grooves on its surface designed to further limit the cornering speed of the cars. Suspension is double wishbone or multilink all round with pushrod operated springs and dampers on the chassis. Carbon-Carbon disc brakes are used for reduced weight and increased frictional performance. These provide a very high level of braking performance and are usually the element which provokes the greatest reaction from drivers new to the formula.

Engines are mandated as 2.4 litre normally aspirated V8s, with many other constraints on their design and the materials that may be used. The 2006 generation of engines rev close to 20,000 rpm and produce up to 740 bhp (552 kW).[10] The previous generation of 3-litre V10 engines are also allowed, albeit with their revs limited and with an air restrictor to limit performance.

Engines run on unleaded fuel closely resembling publicly available petrol. The oil which lubricates and protects the engine from overheating is very similar in viscosity to water. For 2007 the V8 engines will be restricted to 19,000 rpm with limited development areas allowed, following the engine specification freeze from the end of 2006. As outright speed and power are effectively being capped it is widely believed that teams will work on improving reliability, and the torque range of the engine to improve driveability.

A wide variety of technologies – including active suspension, ground effect aerodynamics and turbochargers – are banned under the current regulations. Despite this the 2006 generation of cars can reach speeds of up to 350 km/h (around 220 mph) at some circuits (Monza).A Honda Formula One car, running with minimum downforce on a runway in the Mojave desert achieved a top speed of 415 km/h (258 mph) in 2006. According to Honda, the car fully met the FIA Formula One regulations.

Even with the limitations on aerodynamics, at 160 km/h, aerodynamically generated downforce is equal to the weight of the car and the often repeated claim that Formula One cars are capable of ‘driving on the ceiling’ remains true in principle, although it has never been put to the test. At full speed downforce of 2.5 times the car’s weight can be achieved.

The downforce means that the cars can achieve a lateral force of around four and a half times the force of gravity (4.5 g) in cornering - a high-performance road car might achieve around 1 g. Consequently in corners the driver’s head is pulled sideways with a force equivalent to 25 kilograms. Such high lateral forces are enough to make breathing difficult and the drivers need supreme concentration to maintain their focus for the 1 to 2 hours that it takes to cover 305 kilometres.

With the issue of global warming taking on international importance in recent years, unsurprisingly the focus has fallen on car drivers, with cars seen as one of the major contributors towards global warming. Green cars have been held up as a potential solution, one that motorists should be embracing.

But are green cars actually ‘green’?

Firstly, let’s take pure electric cars. Unfortunately these electric cars are anything but good for the environment. The electricity that they run on is produced in power stations, where only 30-40% of the energy is converted into electricity. Transferring this electricity along electric cables then results in a further 30% being lost to heat energy. So by the time this electricity reaches an electric car a huge amount of the energy has already been lost. Good for cutting down inner city pollution but efficient it certainly isn’t.

Recently hybrid cars have been preferred, cars that contain both an electric motor and a petrol engine. The battery for the motor is powered by the energy generated from braking. When it comes to being ‘green’ these cars in theory offer many more environmental benefits.

In practice this isn’t necessarily the case. Consumer magazine Which? tested four hybrid cars by driving them throughout London. The results were disappointing, as mentioned by George Marshall-Thornhill, senior researcher for Which?, “Some of these should have performed much better.” And this is all without mentioning how to dispose of troublesome electric batteries.

Then there’s the cost of hybrid cars. The Toyota Prius is the most popular hybrid car and can be purchased for around £17,000. However, with fuel economy claims in doubt and 55% of people believing that green cars are too expensive, there is still some way to go before green cars arrive on a large scale.

The facts are that green cars use more energy to produce, are harder to dispose of, their fuel economy claims have been doubted, and they are simply too expensive. The age of the green car has not arrived yet.

In the past, Jaguar, high class cars from England had small-sized and active features and high performance were favorable. Their appearance looked sedan and suited the passengers who loved to get anywhere in a group. They thought that there were many playboy millionaires, and if they were to produce a sport-car model, they could have marketed quite well. At least, Jaguar had built its good reputation from the racing cars for a very long time, especially Le Mans 24 hours.

A lot of people said that Jaguar’s sport series which began to be known well and were affordable could be XK series. XK 120 in the year 1948, followed up by XK 140 in 1955, and became XK 150 in 1957. They used quite modern engines that their competition had not known. Modernization, streamline that made a big positive impact on sport cars drivers, curved doors, and roadsters were the real style of sport cars.

Jaguar made its reputation in the Le Mans race course by a car that had been showed in 1954, D-TYPE, which was 3.4liters, 245 horsepower. The initial production was considered extremely fast. Moreover, it was empowered by making it 270 horsepower for racing, and that made it three-years-in-a-row champion in 1955-1957. There would not be anyone who would not wish the dignity of Le Mans’ championship sport cars which later was extended to 3.8liters, 306 horsepower. It competed in United States and made so big impact on sport cars guru that made a newer model to drive in a street.

The manufacturer decided to make them sport series, and not involved with normal cars except the engines and systems used together in order to reduce the cost of production. Therefore, E-TYPE Jaguar was influenced by XK series and D-TYPE. It was officially debuted in 1961, taking over XK 150, and completing the new full sport style, which was the long front and short end according to the classic style sport cars.

The appearance of E-TYPE is brilliant like Italian sport cars. At the beginning, it had been decided to name as XK-E, but eventually was E-TYPE, which seemed more okay and newer than old XK series that had been used for many models. It had been decided to be 3.8liters, twin cam, then later on extended to be 4.2liters in order to make it right for the size of the cars. The 3.8 liters one had been eventually stopped, until 1971 it was given a new 5.3liters, V12 engine in order to be an alternative choice for customers who were interested in pretty big block. The 4.2liters one’s production was terminated in 1974.

If you would like to own this model, you may need to consider if you are a millionaire or not because this kind of classic cars cannot be found at any car dealers. If you would really want it, you should check it out from a catalogue of car auctioning company. You might be that lucky that someone would sell it.

The H logo on the red background with white paint, newly modified engine and red Recaro seats” A short phrase to define the type-R version from Honda. Type-R stands for Type Racing which was develop to satisfy the need for speed lovers. It was started in Japan at the beginning of the year 1990.

However, the project wasn’t start as a type-R project so you can’t actually call it a type-R. It started from the Civic SiR product line with the vehicle body code EF9 in the year 1991 and later EG6 and EG9 SiR in the year 1992. This version of Honda Civic is the first version came with a B16A engine, sporty interior and a fully modified suspension for the additional horsepower.

Later in the year 1992, the first type-R product line was released to the market. It is the special edition Honda NSX type-R. Honda produced the NSX-R in a limited amount and the car weight was reduced from 1,350 kilograms to 1,230 kilograms.

The type-R was well known for being a modified version for the Honda Civic EK body and the Honda Integra, a sport from the same fundamental during 1,998,000-2,500,000 Yen or only about 670,000-825,000 THB while the NSX reach 10 million yen or about 3 million baht, an affordable price for middle class people who are addicted to speed.

The Civic type-R under body code EK9 comes with a B16B engine which was modified for additional horsepower, the 1.6 liters engine with the total amount of 185 horsepower. It is a well recognized engine without the air compression system or known as NA for being one of the best engines that can produce the most horsepower per 1 liter engine. While the DC2 Integra with a B18C-R engine, 1.8 liters and 200 horsepower with a 5 speed manual transmission.

5 years later, the code EK9 and DC2 sill recognize by the Honda Civic and Integra fans but the Honda motor company doesn’t stop so they came out with the new EP3 Civic and DC5 Integra with the newly change engine from the B family engine to the K20A, 2.0 liters i-VTEC which can yield approximately about 200 to 220 horsepower.

The Honda NSX-R role was decrease and they came out with NSX type-S Zero instead in the year 1997. The NSX-R came back again in the year 2000.

Why the type-R logo must come with the H logo on red background? It is because the first Honda formula-one car that won the grand prix in the year 1960 was painted in championship white and the H logo on red background. Their intention is to keep the sensation of the race from the track to the present Honda cars. In the present there are only the type-R version, all race car and formula one cars that are currently using this logo.

Drivers of modified cars are finding it more and more difficult to show off their artistic masterpieces on streets all across the US. California may have led the way in cracking down on what the state terms as traffic offenses, but other states are following suit. No one can argue that the modifications in these modified cars have gone way beyond what was being done to the original hot rods, but should these modifications really be illegal? Are they really hurting anybody?

While it is true that some enthusiasts have juiced up their engines using illegal means, it is also true that most of those modified cars that have been singled out were not initially pulled over for speeding infractions. In fact, the crackdown on modified cars seems to stem more from an aesthetic problem than anything else.

Many of the violators have been ticketed for exceeding the noise pollution laws. Drivers of modified cars counter that they are being singled out because of unfair comparisons to the drivers in such movies as The Fast and Furious. They claim that the portrayal of modified car enthusiasts in that movie series has caused a backlash against real life owners.

The police forces of not only California, but various other states deny that charge, however. They say that the new breed of modified cars presents a safety risk at high speeds whether it involves racing or not. They point to the increased level of accidents involving modified cars sporting darkly tinted windows, custom rims and wheels, and exhaust pipes. California has, of course, long been the center of the hot rod and modified car universe in America, but the crackdown is spreading all across the country.

But owners of modified cars don’t appear ready to roll over and play dead. In addition to flooding the internet to increase support for their side of the argument via blogs, forums and web sites, they are also attacking the problem via America’s greatest legacy: dissent.

For instance, modified car owners are attacking the crackdown in the state of Virginia with an online petition. The petition identifies the problem as stemming from the vague terminology in Virginia’s laws for modifying exhaust systems and suspension.

Modified cars have been targeted by law enforcement officers for decades. And it is certainly true that drivers of modified cars may be more tempted to engage in high speed racing than the rest of us.

The debate is sure to rage for some time as owners of modified cars feel unfairly singled out and as law enforcement officials feel compelled to make the streets as safe as possible for everyone. The divide between car enthusiasts and the police is likely to grow wider, however, as new and more exciting modifications are discovered.

High performance and low cost were Plymouth’s design goals for a brand-new model in 1968. The company believed that the time was right for a factory hot rod for the youth market, and its guess was right on the money. It would have the macho name of Road Runner.

It was also a very “B Body” budget-friendly machine which made it another very important reason for purchasing. The high cost ruled out many of the muscle cars of the era.

Less money meant less chrome on the body, along with fewer options. In fact, those that intended their Road Runner for the drag strip sometimes ordered the Runner with the small hub-cap-style wheel covers and even deleted the radio.

A member of the Belvedere line, the new model came with a stock 383cid engine capable of 335 horsepower. But that was just the beginning, the awesome 426 Hemi and 440 Six-Barrel engines would become available the following model year.

Of course, the Hemi has been a legend for many years, but that triple-carbed 440 engine had adopted a cult following of its own. A significant body change had been planned for the ‘70 model, but that would be put off until the 1971 model year.

The 1970 440 continued to be capable of 390 horsepower when equipped with the so-called Air Grabber induction system. That interesting system provided a solid connection between the hood scoops and engine once the hood was closed. The sides of the pop-up Air Grabber door were eye-catching with evil-looking shark’s teeth etched on the sides.

The front end was menacing-looking with the blackout grille containing twin headlights mounted in its ends. The aggressive bumper contained a pair of round parking lights on either side of the license plate.

When looking at the ‘70 Road Runner, and comparing it with the other garnish MOPAR muscle machines of the era, it appeared downright stripped. Oh, there was a stripe and 440+6 lettering on the hood, but that was about it. About the only eye catcher was the simulated rear-fender-scoop cut-out.

Some of the models did, however, have a dust trail that reached from near the front of the front fender and disappeared into that scoop.

The only sizable name identification externally was the “Road Runner” lettering contained in a stripe located on the rear end of the car, just above the tail lights. As far as engine identification, in addition to the aforementioned 440+6 designations on the hood, there was also a “440” in the rear of a hood bulge.

With that famous name, the company made the most of it with a special horn to sound like that famous cartoon bird. The horn made the Road Runner ‘Beep Beep’ sound which was unmistakable.

Mike Cenky of Huber Heights, Ohio owns this ‘70 Road Runner hardtop with such an six-barrel 440 engine installation. A retired phone company employee, Mike acquired the four-speed model in 1988 in “fair condition.” I redid the powertrain and suspension system which both needed attention.”

As he was restoring the Road Runner, Mike came across some interesting clues that provided firm indications of the car’s early history. “The engine had a scatter shield, there was an indication of once having a drag-style line-lock set-up, and the rear wheelwells had been trimmed for large racing slicks.

“I bet that it made many runs down the drag strip during those days.” He indicated, though, that type of activity is not in his plans for the orange beauty. “Oh, I might get on it once-in-awhile, but that’s about it!”

Cenky did, however, make several minor changes for better driving comfort. “I used a wider eight-inch rear wheel. Then too, I changed the factory 4.10 ratio rear end to a 3.54 unit which makes the car much more streetable.” For a cleaner look, the small Road Runner decals-normally on the front quarters-and small chrome RR emblems on the rear quarters.

The car is coated in a flashy Tor Red color, a color which is carried to the exposed wheels which carry the small wheel covers, and in MOPAR style, also into the engine compartment. It’s highlighted with that broad black hood stripe which contains the hood scoop and is outlined by two narrow stripes. There is definitely a racecar look about this stunning machine.

The car also carries the Super Track Pack which included front disc brakes, heavy duty cooling package, special cooling fan, and the Dana rear end. The interior is done in black vinyl and sports bucket seats.

Cenky explained that even though the car is 36 years old, most people at car shows know exactly what it is. “I am always hearing from them that they owned one or knew somebody that did,” he explained. Mike’s long been a Chrysler fan, and it comes naturally. “My dad worked for the company for many years and all we ever had were Chrysler cars.” And over the years,

Mike has owned a number of vintage performance MOPARs, including a ‘67 440 R/T, a ‘70 Dodge Challenger 440 Six-Pack, a ‘72 340 Plymouth Duster, and a ‘70 Chrysler 300.

There is no mistaking the look of those Chrysler-built ‘60s and early muscle machines, and they are certainly a favorite of mine.”

And ours too!

Copyright © 2005-2006 Muscle car News Magazine Privacy Policy

High performance and low cost were Plymouth’s design goals for a brand-new model in 1968. The company believed that the time was right for a factory hot rod for the youth market, and its guess was right on the money. It would have the macho name of Road Runner.

It was also a very “B Body” budget-friendly machine which made it another very important reason for purchasing. The high cost ruled out many of the muscle cars of the era.

Less money meant less chrome on the body, along with fewer options. In fact, those that intended their Road Runner for the drag strip sometimes ordered the Runner with the small hub-cap-style wheel covers and even deleted the radio.

A member of the Belvedere line, the new model came with a stock 383cid engine capable of 335 horsepower. But that was just the beginning, the awesome 426 Hemi and 440 Six-Barrel engines would become available the following model year.

Of course, the Hemi has been a legend for many years, but that triple-carbed 440 engine had adopted a cult following of its own. A significant body change had been planned for the ‘70 model, but that would be put off until the 1971 model year.

The 1970 440 continued to be capable of 390 horsepower when equipped with the so-called Air Grabber induction system. That interesting system provided a solid connection between the hood scoops and engine once the hood was closed. The sides of the pop-up Air Grabber door were eye-catching with evil-looking shark’s teeth etched on the sides.

The front end was menacing-looking with the blackout grille containing twin headlights mounted in its ends. The aggressive bumper contained a pair of round parking lights on either side of the license plate.

When looking at the ‘70 Road Runner, and comparing it with the other garnish MOPAR muscle machines of the era, it appeared downright stripped. Oh, there was a stripe and 440+6 lettering on the hood, but that was about it. About the only eye catcher was the simulated rear-fender-scoop cut-out.

Some of the models did, however, have a dust trail that reached from near the front of the front fender and disappeared into that scoop.

The only sizable name identification externally was the “Road Runner” lettering contained in a stripe located on the rear end of the car, just above the tail lights. As far as engine identification, in addition to the aforementioned 440+6 designations on the hood, there was also a “440” in the rear of a hood bulge.

With that famous name, the company made the most of it with a special horn to sound like that famous cartoon bird. The horn made the Road Runner ‘Beep Beep’ sound which was unmistakable.

Mike Cenky of Huber Heights, Ohio owns this ‘70 Road Runner hardtop with such an six-barrel 440 engine installation. A retired phone company employee, Mike acquired the four-speed model in 1988 in “fair condition.” I redid the powertrain and suspension system which both needed attention.”

As he was restoring the Road Runner, Mike came across some interesting clues that provided firm indications of the car’s early history. “The engine had a scatter shield, there was an indication of once having a drag-style line-lock set-up, and the rear wheelwells had been trimmed for large racing slicks.

“I bet that it made many runs down the drag strip during those days.” He indicated, though, that type of activity is not in his plans for the orange beauty. “Oh, I might get on it once-in-awhile, but that’s about it!”

Cenky did, however, make several minor changes for better driving comfort. “I used a wider eight-inch rear wheel. Then too, I changed the factory 4.10 ratio rear end to a 3.54 unit which makes the car much more streetable.” For a cleaner look, the small Road Runner decals-normally on the front quarters-and small chrome RR emblems on the rear quarters.

The car is coated in a flashy Tor Red color, a color which is carried to the exposed wheels which carry the small wheel covers, and in MOPAR style, also into the engine compartment. It’s highlighted with that broad black hood stripe which contains the hood scoop and is outlined by two narrow stripes. There is definitely a racecar look about this stunning machine.

The car also carries the Super Track Pack which included front disc brakes, heavy duty cooling package, special cooling fan, and the Dana rear end. The interior is done in black vinyl and sports bucket seats.

Cenky explained that even though the car is 36 years old, most people at car shows know exactly what it is. “I am always hearing from them that they owned one or knew somebody that did,” he explained. Mike’s long been a Chrysler fan, and it comes naturally. “My dad worked for the company for many years and all we ever had were Chrysler cars.” And over the years,

Mike has owned a number of vintage performance MOPARs, including a ‘67 440 R/T, a ‘70 Dodge Challenger 440 Six-Pack, a ‘72 340 Plymouth Duster, and a ‘70 Chrysler 300.

There is no mistaking the look of those Chrysler-built ‘60s and early muscle machines, and they are certainly a favorite of mine.”

And ours too!

Copyright © 2005-2006 Muscle car News Magazine Privacy Policy

Cars have long since been held as a fascinating piece of engineering and the vehicle has come a long way since the invention of the wheel. Boys and to some extent girls are into playing with cars from a young age and for many this fascination goes on to become a hobby. Some collect, others learn to drive and drive as much as they can, yet others turn their driving passion towards racing and other car oriented sports. In the sporting arena we have the sports car enthusiasts who will do anything to be with their cars.

Another category is the sports car fan and drivers who have graduated to actual production of these cars. They will go on to build cars from scratch to resemble some of the most valuable and rare cars in the history of cars. These are called kit car owners who go the distance to make quality replicas of the original vehicle. Now the end product looks almost indistinguishable from the original. Take the famous Cobra - it has a lot of takers.

There is something to be said about getting the tool box out and building your own replicar. Some actually revel in the challenge that this hobby brings with it. You also get to create your dream car without spending a fortune on it. Replicars facilitate building your own car ground upwards using a kit body along with a common mainstream automotive base and other parts. In itself the world of replicars is a different world altogether which comprises builders and fans. They hold rallies and get togethers where there is a lot of interaction and a lot of ideas are exchanged and most tend to find parts that they need and another does not. Not only does this hobby encourage more socializing with like minded people it also brings with it a heady mix of people from different walks of life and one gets a chance to learn about different aspects of replicars and others’ experiences.

A personally-built car means you have a very clear idea of your car’s capability and limitations. So the success of your car depends on your ability to have understood what you have made and to use it to its optimum strength. Of course there is always the option of buying your favorite classic model and driving it around but to build a replicar and then use what you have put together is a feeling only true enthusiasts can understand. These classic cars models sure make heads turn and they come with interesting stories too. Replicar enthusiasts and kit car builders are the ones who really know what driving is all about as they are both the creators and the users.