By Mike Cain

The MGF, designed and produced by Rover, is a small mid-engined sports car, with a soft top roof and plenty of boot space. Despite this, it is not renowned for its practicality, but if that is what you are looking for then you are missing the point of the MGF - it is intended to be fun to drive and something of a head turner. The driving position is quite low to the ground, which means when the top is down you get a unique driving experience, it is ideal for the summer months. It grips the road well and has good balance when driving, which is just as well with a 0-60 time of just 8.5 seconds. It responds immediately to the slightest touch on either the accelerator or the break, roaring into life with a great burst of energy, yet slowing quickly without much effort.

However, the slightly cramped cabin (especially when the roof is up) and hard body styling makes for an uncomfortable time when taking in long journeys or negotiating bumpy roads and sharp corners. The plastic rear windscreen means is liable to cloud up, and can become creased and folded where the roof has been put up/down many times. Frequent problems have also been reported with head gaskets on the older models, and this is a common cause of breakdowns.

Second hand values have stayed quite strong, due to Rover restricting the supply, and cars can be picked up from around £3,500 for a 1995 model and upwards, and it proves relatively cheap to run. Fuel consumption is good, at around 38.4 mpg, and with an insurance group of 9/10 cover is cheap as well.

Production is due to begin once more in 2008, courtesy of Nanjing Automobile, at the old Longbridge plant in West Midlands, as well as in their yet to be completed Chinese factory. The MGF is expected to go back on sale in 2009.

All in all the MGF is a fun sports car, with great style and personality, suitably cosy and enjoyable during the winter, and a fast, thrilling ride in the summer sun. —————————————————————-

Gas powered Scooters are making a comeback as the preferred mode of transportation.

No longer are they just for kids. Gas powered scooters are rapidly taking over as the preferred method of transportation to work and school. They are economical, can maneuver through tight spaces and with a gas scooter, you can take short-cuts that an automobile can not.

Gas powered scooters are also known as mopeds which is a two-wheeled (normally) low powered vehicle. In most states its small size and low power output allow it to escape many of the licensing, insurance, and driver restrictions placed on motorcycles. However, be careful of the true description of moped.

a. A moped is traditionally defined as a motorized 2 wheel vehicle that is part human and part motor driven. A moped has pedals so that it can be propelled by human power. As you can see, gas powered scooters do not fit most states definition of moped.

Don’t fret though, a gas scooter used properly will not get you into any trouble in most places. If used responsibly and traffic laws are obeyed, most law enforcement won’t touch you.

Gas scooters were first introduced in the mid 1950’s. The first design was little more than a bicycle with an engine mounted on it, it was called a cyclemotor. The cylcemotor can still be seen on the road these days in the form of electric bikes.

One reason some people have a gas scooter is to circumvent loosing a driver’s license. Many states don’t require a driver to have an operator’s license if they are over eighteen years of age, sixteen in some states. They also don’t require insurance and registration.

Gas powered scooters have several advantage that should be noted.

a. No parking spots required. Some gas powered scooters can fold down for easy storage right in your office, or you can tie it up at the door with the bicycles right in front of the buildings door or on the sidewalk.

b. A gas powered scooter is faster than the average electric scooter. They can travel at speeds up to thirty-five miles an hour.

c. Gas powered scooters can maneuver rather well – A gas powered scooter is a great way to move through traffic. They dart in and out between cars, especially gridlocked traffic. Imagine sleeping in an extra twenty-thirty minutes. With the time you save avoiding traffic, you can afford to. how smart are you?

d. Gas scooters have very cool body styles; some gas powered scooters look more like miniature motorcycles than scooters.

e. Gas scooters save tons of money - While the cost of gassing up gas powered scooters might seem expensive compared to the low cost of running an electric scooter, the mileage they get quickly makes up for the gallon of gas they require.

f. Maintenance is a breeze– A Gas scooter is easy to maintain. With a basic grasp of tools and a decent book about mechanics most people are able to maintain their gas powered scooters in their own garage.

The best thing about a gas scooter is the freedom to literally go just about anywhere. While you ride your scooter along the trail or the beach, you can go more places than most automobiles. Hop on your new gas scooter and get ready for a new adventure. Take a minute and smell the roses or take in the sights like never before. What more could you ask for?

A booster seat is a simple concept and it has a very simple function. This simple function is this: it is there to save the life of your child. A car accident is not something that anyone really wants to think about, especially where children are concerned, but to be prepared for the eventuality is one of the best things you can do for the safety of your child.

A booster seat is easily added to a standard automobile, and they are relatively inexpensive. And yet they can save your child’s like or save him or her from serious injury.

But what’s wrong with a normal seat, I hear you ask. After all they have seat belts, which are great life savers. True, they do, and seat belts are a lifesaver. But the problem is that seats are designed with primarily adults in mind. The same goes for seat belts. In fact, using seatbelt on a child can actually be more dangerous than it is effective at protecting the child, since the belt can become entangled with the child and cause injury.

Most injuries to adults are caused by the adult not putting on the seatbelt in the correct way. And since seatbelts are not designed for children, but for adults, then the seatbelt will automatically be put on in the wrong way, putting the child at risk, and possible great risk in the event of a car accident.

All this is why you need a booster seat. These are seats which fit into a normal car seat, and allow the child to sit properly. They allow the seatbelt to be used properly, and they give support to a child’s body. This is essential if there were to be an accident.

So before you even contemplate taking your little one out for a ride in the car, think booster seat. It could be one of the best purchases you ever made for your child.

Previous Jaguar XK, which was produced in 1996 and terminated in June of 2005, is considered a good selling sport car in the previous time. It is quite a challenge of new XK that the design and automotive engineering must be better than the old one. New XK improves the progress in automotive engineering very much and is more than Jaguar’s expectation in the production of sport cars. It is because its development in aluminum body, transmission system, modern and luxury inner design. Debut a new Jaguar XK, which is fully improved in design, engineering, and thrust, is considered an extreme excitement.

New Jaguar XK was debuted in the beginning of 2006, and it showed the leadership of light-weighted automobile technology and still stayed beauty. A quality production of new XK will show the performance, luxury, and Jaguar design.

New XK is categorized in large-sized luxury sport car. Its market has high rate of growth and competition. During 1996-2006, sport cars market around the world has been growing over 200 percent, from 48,000 to 99,000 cars, as well as the quantity of competitors, from 4 to 7. It is predicted that in the next 5 years, there will be at least 8 competitors.

Generally, there are 2 main groups in large-sized luxury sport cars, which are Grand Tourers, high class luxury and comfortable one, and Overtly Sporty Cars, great performance and control. For XK, the significant property that draws both kinds of customers is the luxury sport cars and has great performance and control. In the past, when customers were going to buy one, they would have to consider which kind of sport cars they would really want, between luxury and comfortable or a great control.

New XK can interest customers who want a luxury car. That means they are looking for Grand Tourers that indicates wealth and extra but still sport, or in other words, luxury in sport style.

New XK has an incredible appearance which shows Jaguar-ness and high performance. Furthermore, customers will see the inner design which is very well-blended. Everything will focus on the driver. For instance, high quality materials, color tone, and many technologies play a part in comforting the drivers which makes the cars their highest performance.

The modern technology will help produce customers’ driving experience and get their hearts. For example, an automatic reverse variation speed controlling and touch screen display in center console. We can say that new XK is the best sport car that can very well satisfy the customers in both sport style and luxury.

In the first place, long time ago, when the first car appeared and the automobile industry was born this way of transportation was seen more as a hobby. The ordinary people would still use the old ways of transportation. So the car’s utility wasn’t fully understood not until in the 20th century. Now the car is an object that is no longer thought to be a hobby but a must, it is now an utility. People can no longer imagine their world without the automobile.

Unfortunately for some of us, cars are still too expensive. Not everybody can afford to spend a lot of money on new cars. That is why the car auctions are so successful today. This type of auction is used in a lot of countries, and is now a common practice.

In the United States the number of car auctions has increased since a few years ago and is constantly increasing. There are car auctions in every city, there are car auctions in L.A, car auctions in New York, car auctions in Sacramento, and so on.

The car auction in Sacramento for example, has nothing more or less from the car auction in L.A. All the car auctions work around the same idea: used cars that people can buy for a lower price.

What are Car Auctions Really about?

For dealers, the car auction is a great marketplace, a marketplace full of opportunities and a very important part of their business. The car auction represents the meeting point where both socializing and big transactions take place.

Because we first took the example of the car auction in Sacramento let us continue with this one. Cars end up at a car auction for all kind of reasons. It’s the same here, with the car auction in Sacramento. One of the reasons why cars end up at a car auction, for example at the car auction in Sacramento, is their age.

Many dealers offer all sort of leases and other types of facilities. When returned, these “off-lease” cars will end up at a car auction. This happens because it is much easier and also more convenient for the dealership to use the car auction system instead of just trying to sell them and place them in a car lot, especially if the vehicles are well used.

Another way how cars can end up at a car auction is that their companies are trading them. The companies’ cars are usually traded after some years, and the car auction is the best place where they can be sold. That is why the car auction is the best place where you can either sell or buy a used car. It’s the same at all the car auctions, regardless of their location, and it’s the same at the car auction in Sacramento too, just in case you were asking.

Cars have long since been held as a fascinating piece of engineering and the vehicle has come a long way since the invention of the wheel. Boys and to some extent girls are into playing with cars from a young age and for many this fascination goes on to become a hobby. Some collect, others learn to drive and drive as much as they can, yet others turn their driving passion towards racing and other car oriented sports. In the sporting arena we have the sports car enthusiasts who will do anything to be with their cars.

Another category is the sports car fan and drivers who have graduated to actual production of these cars. They will go on to build cars from scratch to resemble some of the most valuable and rare cars in the history of cars. These are called kit car owners who go the distance to make quality replicas of the original vehicle. Now the end product looks almost indistinguishable from the original. Take the famous Cobra - it has a lot of takers.

There is something to be said about getting the tool box out and building your own replicar. Some actually revel in the challenge that this hobby brings with it. You also get to create your dream car without spending a fortune on it. Replicars facilitate building your own car ground upwards using a kit body along with a common mainstream automotive base and other parts. In itself the world of replicars is a different world altogether which comprises builders and fans. They hold rallies and get togethers where there is a lot of interaction and a lot of ideas are exchanged and most tend to find parts that they need and another does not. Not only does this hobby encourage more socializing with like minded people it also brings with it a heady mix of people from different walks of life and one gets a chance to learn about different aspects of replicars and others’ experiences.

A personally-built car means you have a very clear idea of your car’s capability and limitations. So the success of your car depends on your ability to have understood what you have made and to use it to its optimum strength. Of course there is always the option of buying your favorite classic model and driving it around but to build a replicar and then use what you have put together is a feeling only true enthusiasts can understand. These classic cars models sure make heads turn and they come with interesting stories too. Replicar enthusiasts and kit car builders are the ones who really know what driving is all about as they are both the creators and the users.

In the past months we have seen the price of gasoline soar higher than ever before, and this can be hard on people who have a budget that is tight. Even though gas prices have come down a slight bit, you still will want to do everything you possibly can to save on the money you have to pay out for gas. There are a variety of ways that you can save gas, and save money.

Tip#1 - Start Carpooling

Carpooling is a great idea for fellow students and fellow employees both. If you can find people that are going to the same place you are you can save gas by riding together. It may be a good idea to trade off on who is driving from week to week so no one person gets stuck having to drive all the time. If you have to take your children to school or other functions you can also work on trading off with your friends and neighbors to take them there.

Tip#2 - Public Transportation

If it is possible you can take public transportation to work instead of driving your car. Not only will this save you money on gas, but you will also be able to relax and not worry about having to drive through all that rush hour traffic. You may even be able to fit in a quick nap on your way to work or on your way home.

Tip#3 - Price Shop

Often it may be so convenient to buy your gas at the small gas station just up the road, but to save some money on gas you may want to check the prices at other gas stations that are nearby as well. Even if the difference is only a few cents, after putting hundreds of gallons of gas in you vehicle each year, those few cents are going to add up to quite a sum of money.

Tip#4 - Get Moving

You can save some money on gas if you start walking to where you are going, or you can ride a bike as well. You will not have to worry about paying to park your car, and the exercise will be great for you body. If you are walking or biking you will not have to worry about those huge traffic jams either.

Tip#5 - Take Care of Your Car

It is always important to take care of your car so it gets the best gas mileage possible. Also be sure to plan where you are going before you go so you will not have to backtrack and waste gas. If you can, you should use your air conditioning as little as possible because using it takes more gas. Roll down your windows and you will use less gas.

Tip#6 - Check your Tires

It is important that you check the air pressure in your tires as often as possible. If your tires are too low, or the pressure in them is unequal it can make your car burn more gas. You should also be careful how you drive. If you take off from every red light very fast you are going to burn more fuel, so it is best to take off a little slower.

These are a few tips that can help the money conscious person to save money on gas. Even as gas prices drop, these tips can still help you to save more money. Conservation is important, so take advantage of these tips, save money, and save gas.

Lifts are used to raise a vehicle on a stable platform, allowing automotive mechanics unrestricted access to inspect and repair the underbelly, transmission and wheels of the vehicle. Multiple vehicle lifts are standard equipment in most auto repair shops. In addition, some automobile enthusiasts install lifts in their homes for vehicle storage.

Prior to 1920, only service pits were available for repairing and doing preventive maintenance on the undersides of vehicles. The hydraulic auto lift was invented in the 1920’s to reduce the time and equipment needed to hoist vehicles off the ground. Depending on the design used, .today’s vehicle lifts can raise up to 50,000 pounds and can cost between $9,000 and $45,000. Installation not included.

In the beginning, there were no industry standards and vehicle lifts varied in design and construction. After World War II, there were only fifteen auto lift manufacturers in the United States. They recognized the need to develop standards to guide the industry. In 1947, the U.S. government issued its first set of standards. The Occupational Safety and Health Administration developed its own regulations in 1974.

Today, there are three major manufacturers of heavy lifts: Mohawk Resources Ltd. of Amsterdam, NY; Advantage Lift Systems based in San Diego, CA; and Rotary Lift in Madison, IN. Electric controls for lifts are standard, and lift features vary according to price and model. They vary depending on where they make contact with the vehicle, usually the axles, frame or wheels. They include single-, two-, four-post, and scissors lifts. The single- and two-post lifts are ideal for small trucks and cars. The four-post auto lift is used for most commercial and transit vehicles. The scissors lift saves space by having the posts in the middle of the lift, operating like an open pair of scissors.

Over the years, the structure of the automobile body has changed. Vehicles previously built onto underbody frames are now being constructed into frameless or unibody styles. Lifts have evolved to better handle the structure of newer vehicles. Rotary, for example, has developed the three stage lift. It has three telescoping sections, giving it a greater range of extension and retraction than other lifts. As a result, it can reach a broader range of vehicle pick-up points. It has become the preferred lift of many vehicle manufacturers, including Honda, Volkswagen and Audi.

Despite changes in the design of lifts over the years, many injuries and accidents occur annually. This is usually due to human error rather than any flaw in the lift design. The most simple things often lead to disaster. Auto mechanics sometimes fail to keep the lift area free of debris, grease/oil and obstructions. Not paying close attention when working around the lifts or allowing untrained individuals to use them are two more potential problems. Some forget to wear the right safety gear, including goggles, a hard hat, and steel toed boots.

Proper use and maintenance of the equipment is essential. Blocking or overriding the controls is dangerous. The manufacturer’s rated capacity is shown on the nameplate affixed to lift. Despite this, some mechanics use the lift to hoist vehicles that exceed the weight limit.

An ounce of prevention is better than a pound of cure. Mistakes made before the vehicle is lifted are accidents waiting to happen. The lift arms must be properly positioned before the vehicle is raised. If the center of gravity of the car is not on the center of the lift, cars may tip off. With some vehicles, removing or installing items may cause a critical shift in the vehicle’s center of gravity and result in instability. Mechanics should always refer to the lift manufacturer’s recommendations. If there is not ample overhead clearance space, the vehicle may be crushed. Mistakes also occur when the transmission is not in neutral, doors are not securely closed or the ignition is not turned off. Some repairmen fail to lock the lift into place before going under it. Others raise the car while someone is inside the vehicle.

Numerous accidents occur during the lifting process. The vehicle should be loaded on a lift carefully. Mechanics should ensure that the lift supports are in contact with the manufacturer’s recommended lifting points. When a secure contact is made, the lift can be raised to the desired working height. If work will be done under the vehicle, the lift should be raised high enough for its locking device to be engaged.

Before lowering a lift, the mechanic should ensure that everything is removed from under the vehicle. Locking devices should be disengaged before the lift is lowered.

The truth about fallacies of many car owners believing that the insurance premium coverage for their new car is covered, and maybe the truth just might make you change course. (1) “No-fault insurance means, is it not my fault?” That means that your insurance company pays for your damages regardless of who’s at fault. No they don’t!

(2) “Can the color of my car affect my insurance rate?” No! What do influence your rate are your vehicle’s year, make, model, body type, engine size, credit history and driving record.

(3)”If I lend my car to a friend and that friend is in an accident, his or her insurance company will pay for the damages…right?” Wrong!

Your car is your responsibility! And guess what, even though you weren’t present at the time of the accident, you still will receive a mark on your insurance record and your insurance premium could possibly go up.

(4) “Is my insurance rate is set by the government?” No! The government has nothing to do with your car insurance rate. Where you live, your credit score, marital status and your driving record is what actually affects your premium.

(5) “I recently paid my insurance premium. Is my new car I just purchased is covered?”

Not necessarily. Most automobile policies require that the policyholder notify the insurance company or agent within a specified number of days, if indeed coverage is desired for the newly purchased vehicle.

(6) “Is it a fact that male driver under the age of 25 pay more for auto insurance?” Yes! Male driver under 25 years old can potentially pay more for car insurance than female drivers. However, across the board, teenagers and mature adults pay more for auto insurance, due in large part because these age groups are typically involved in more automobile accidents.

(7) “Can my credit score have any affect on my insurance rate?” Your credit score really does matter! Many Insurance companies take your credit score into consideration when deciding to increase or renew your auto insurance coverage.

(8) “Even without comprehensive coverage, am I still covered for theft, windstorms, and hail and deer accidents?” Many drivers believe that if they only purchase collision insurance, which covers accidents involving objects, that they will also be covered for incidents that involve vandalism, hail, animal accidents and fires. That simply is not true. You need to purchase both collision and comprehensive coverage in order to fully protect your vehicle from all of these situations.

(9) “Can my personal auto insurance cover both my personal and business use of my car?”

If you occasionally use your personal car for business purposes such as transporting clients, going to and from meetings or hauling business equipment, then you will more than likely need to extend your personal car insurance to cover your business use as well. Plus, if your employees use their car while working for you, you will want to also obtain a separate non-owned car insurance policy.

(10) “I’ve never had nor been involved in a car accident, do I still need automobile insurance?” Yes!

Some drivers are lucky enough never to have been or to be involved in an accident. However, if by chance you do have an accident; your risk of losing everything is great. Car insurance is the best protection you can have in the event an automobile accident occurs. It’s also a legal issue - you are required, by law, to have some basic form of auto insurance, and failing to do so carries some fairly strict punishments.

A car with an excellent paint job is one of life’s true joys. It’s like being the kid with the best bike in the neighbourhood or the biggest piece of birthday cake. Whether you drive a ‘47 Eldorado, a ‘66 Beetle or an ‘07 fortwo, a great paint job will take your vehicle from ho-hum to headturner.

Actually creating a great automotive paint job takes skill and finesse. Automotive painting is one of the most arduous and painstaking tasks in crafting an automobile. It can also be one of the most costly. If you are on a budget, there are options for you. Some paint shops can deliver a good paint job for a fair price. Your other option is to take on the task yourself. If the paint job is a success, you’ll have even more to brag about: a hot set of wheels AND a "do it yourself" tale to tell. Achieving a great paint job is a step-by-step process. You simply can’t rush automotive painting. Follow the basic steps of preparation, primer application, blocking, final paint coat and detail application. This can seem like a daunting task for any beginner, but the entire job can be completed in just a few days.

Prepare Before you begin, check with local bylaws and regulations regarding the use of spray paint in homes and enclosed areas. The last thing you need is a legal holdup delaying your painting job.

Cleaning the car is your next crucial step. The car must be spotlessly clean and free of dirt. Use detergents to clean the car top to bottom, and then follow up with grease removers. After the car has been cleaned, it’s time to begin sanding. An air sander (preferably a dual-action sander) should be used to remove the old paint from the car. This kind of sander will not cause body damage because it removes paint without digging like other sanders and grinders. Every trace of paint must be removed to create a perfect palette for your new paint job. Automotive detailing tape or even duct tape can be used to cover and protect other parts of the car, including plastic moldings and windows. In addition to removing the old paint, all traces of rust have to be sanded off. Rust will spread if ignored or untreated, and the last thing you want is body rot happening beneath your spiffy new paint. You can repair minor body flaws on the car’s surface using fillers. Shape the compound with care using a sanding board, then follow up with a glazing compound. This step will help to ensure a smooth-as-glass finish on your ride.

Mask After the whole car has been initially cleaned, then sanded, a final cleaning takes place and the vehicle is ready to be masked. In this step, every part of the car that shouldn’t be touched by paint is covered and protected. Remember, you will be using high-grade automotive paint that doesn’t wash off with water. Cover your windows, every light and reflector, all window rubbers, all chrome, tires, wheels, door handles, wipers.. take a good look and what needs to be masked. If you don’t want even the tiniest bit of over spray on it, cover it up! The tools and materials needed for masking are available at automotive supply warehouses and hardware stores.

Prime Priming is an essential step to providing a good foundation for your new paint. A flawless prime coat will help you to achieve a perfect paint job. Valspar epoxy is a good primer choice, combining dependable filling capabilities with minimal shrinking. After the primer has been applied, a second coat in a contrasting colour should be applied on top of the first layer. This will serve as a sanding guide. The primer should be sanded to a smooth finish, but don’t sand too vigorously or you could actually damage the body of the car. When the priming is complete, a sealer is applied and a final sanding takes place.

Finishing off In finishing off the automotive painting, it is essential to achieve uniform colour. The spray gun should be held ten to twelve inches away from the body to avoid streaks and runs. This is necessary when applying the basecoat, final coat and clear coat.

Regardless of the type of car you drive, a new paint job can turn it into a real showstopper. Automotive painting can be a time consuming task, but you can do it if you take it step by step. The creative energy will be good for your soul, and the compliments you receive will be great for your confidence.